Probs with text

Just go into setting pick up the language issue and change the language to English. It is very easy. If you don't know which option to check in than check setting option one by one. you should be fine.

Hi,

Welcome to Fixya. If you want to undo the preddictive text just follow the guide below.

1. From any text entry screen (ie. when you are writing a text message), press the top center button, the one above the directional wheel.

2. Press on Entry SetUp

3. Select the Primary Set Up or Secondary Setup by choosing your preferred input mode among the ones below. Us the wheel by pressing on the right arrow to change mode:

ITAP: it's a built-in software which predicts the word you are typing. THIS IS PREDICTIVE TEXT

TAP: enter individual letters and numbers by pressing the keys multiple times. Ie. for the letter F press the number 3 button three times.

Tap Extended: enter individual letters, numbers and symbols by pressing the keys multiple times

To change from one mode to the next you can select it by pressing the top center button from a text entry screen, and Press on Entry Mode. Shortcut: you can press the # key on your phone when you are writing a message and you will see abc1 for your primary mode, 123 for numeric; @ for symbols; and abc2 for your secondary mode.
If you have questions please let me know. Thanks for using Fixya.

Press # in a text entry screen to select an
entry mode
1 Your Primary text entry mode can be set to any iTAP® mode or tap mode(indicated by 1).
2 Your Secondary text entry mode can be set to None, or set to an iTAP
mode or tapmode (indicated by 2).
123 Numeric mode enters numbers only.
@ Symbol mode enters symbols only

when you open up to write a text message..before you type click on the menu botton,youll see the choice's..click on entry mode then go to the secondary choice

Go to messages, new message, go to the menu(middle button) select entry options/method/settings, go to primary and select TAP English, go to Secondary and select None.
Text-Entry Methods:
iTAP - Lets you enter words using one key press per letter. The iTAP® method combines your key presses into common words and predicts each word as you enter it.
TAP - Lets you enter letters and numbers by pressing a key repeatedly to cycle through the letters and number on that particular key.
TAP Extended - Same as TAP, but cycles through additional special characters and symbols as you repeatedly press a key.
Text-Entry Modes:
Primary - You can set your Primary entry mode to any iTAP or TAP entry method.
Secondary – You can set your Secondary entry mode to any iTAP or Tap entry method, or you can set it to None if you do not want a Secondary entry mode.
Numeric - Enter numbers by pressing the number keys.
Symbol - Enter symbols by pressing a key; its symbols are displayed at the bottom of the screen. Scroll to the desired symbol and then press Select.
To set the text-entry mode or method:

• From a text-entry screen, press Options.
• Scroll to and select Entry Setup or Text Setup.
• Select the desired text-entry mode or method.

Tip: From any text entry-screen, you can quickly change your text-entry mode without leaving that screen. Press the # key repeatedly to cycle through the text-entry modes: Primary, Secondary, Numeric, and Symbol. With each press of the # key, the mode indicator in the upper left of the text-entry screen changes.

Go to Messages,then go to Create SMS the message multiline appears . Now press the round button in the centre of directional keys, this will take you to message editor. Now go to Entry set up . In the Primary setup select TAP english and in the secondary set up select TAP English.

solution was that the phone has got tap in settings menu and you have to reset to this to stay off predictive text once found it works but instuction book does not say anything on reset settings


weel done motorola keep us all in the dark

red assassin,

go to write new message>>press option(its in the middle)>>choose entry set up>>select primary set up>>then choose tap extended>>and for the secondary set up>>just choose none..and ur predicting words will be deactivated..

Go to Messages -->Create-->SMS/EMS-->the message multiline appears . Now press the round button this will take you to message editor. Now go to Entry set up . In the Primary setup press the iTAP english and in the secondary set up select TAP English....This will work ........if you still have problem contact me

[email protected]

Go to Messages -->Create-->SMS/EMS-->the message multiline appears . Now press the round button in the centre of directional keys, this will take you to message editor. Now go to Entry set up . In the Primary setup select TAP english and in the secondary set up select TAP English.