Whats the screw size for an APEX LCD 32' HDTV so i can connect to a mount

Are u trying to mount it on the wall ?
If so. Buy a universal **** it come with all the screw
Or call Qcwireless thay can get thm for u

If you need further help, I’m available over the phone at https://www.6ya.com/expert/omar_c87dacfef1e87642

Most flat screens use 4, 6, or 8mm, be careful not to use too long a screw.

Not sure what you are asking. Are you looking for the screw for the attaching the mount to the TV or the mount to the wall.
If you are looking for the screw size for the back of the TV, it could be metric size M6 or M8. Just be careful of the length. Too long and you will ruin the TV. Maybe google the TV model and it might show in the owner manual the exact screw to use.

THE SCREW YOU NEED COMES IN ALL VESA COMPLIANT MOUNTS

To know the exact size of the screw, you have to get the circumference of the hole where you will insert the screw. If possible to bring with you the outer mounting in buying the screw to have a perfect fitting.

according to manual the screw type is M6 , 1.00mm pitch and length is dependent on thickness of stand . you should have had a packet of assorted sizes of screw with the stand . you can also get the users guide by typing in make & model size

I went to Lowes and found some 4mm .7 screws, 25mm long, and they worked like a champ. (get the lock washers too)
Apparently, most mounts include only 5mm and larger screws

You are correct. Polaroid does not make the screws available. You will have to obtain locally, per Polaroid.

I found out via Polaroid's customer service... you need size M6 screws to reattach the base to the TV