Where can i download a free manual for a Kenwood kdc 1028 cd in dash receiver

SOURCE: Kenwood KDC-3028 unlock code

TY TY TY..fixed this right on up. Only suggestion I could make is that a diagram of where the aforementioned buttons are. I did mine at night so the small words were hard to see. I just replaced my battery and cleaned off the cables connectors when this problem occurred. TY so much for this.

SOURCE: kenwood kdc-mp238

I have the MP-283 Model and the directions are poor not doubt,
I too was also having trouble with the DEMO mode and clock adjustment.

I put the stereo in standby mode, then press and hold the control knob for 2 seconds, then release and press the bass boost/ menu button, this shold open up all the options of the setero by using the control knob up/down to scroll through the various adjustments.

SOURCE: kenwood cd receiver KDC-MP436U

Protect:- The speaker wire has a short circuit, or touches the chassis of the vehicle, then the Protect function is activated. Wire or insulate the cable properly and then press the reset button. If the "Protect" code does not disappear, consult your nearest service centre.

SOURCE: subwoofer option on my kenwood kdc 138 receiver

go to kenwood wesite to down load instruction manuals

SOURCE: i have a kenwood kdc-mp205 cd player. how do i

Here is how to set the clock :
Enter standby Mode:
Press the [SRC] button,Select the "Standby" display.
Select clock Adjustment mode:
Push the control knob towards FM or AM, thenn Select the CLK ADJ display.
Enter Clock Adjust mode:
Press the control knob at least 1 second until the clock display blinks.
Adjust the Hours:
Push the control knob towards AM or FM
Adjust the Minutes:
Push the control knob towards |<< or >>|
Exit Clock adjustment mode:
Press the [Menu] button.
That should do it!