Vtech IP5825 Cordless Phone Logo
William Horton
William Horton Posted on Feb 03, 2007
Answered

Not Registered I found that my Vtech 5825 phone was dead one morning. I tried charging it but it wouldn't charge. I put new batteries in it and the screen had "Not Registered" on it. It wouldn't do anything and it still wouldn't charge. I tried taking the batteries out and unplugging the base from the electricity and phone line for a few minutes. No change. The second handset still works. Anyone know how to re-register this phone?

Answer This Question
  • 1 more comment 
  • William Horton Apr 21, 2007

    Finally got a response from Vtech support:

    "There is no procedure on how to re-register the handsets on this model."

    Thanks for the help Vtech.

  • Anonymous Mar 18, 2014

    My Uniden phones were registering "low battery" on 2 of them. I ordered replacement batteries and installed them, but the red LED light is not coming on, neither is there a "charging" message on the screen. Wouldn't the LED light come on anyway while the phone is charging?

  • Anonymous Mar 27, 2014

    phones still chirping

×

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

  • Contributor 2 Answers
  • Posted on Jun 01, 2007
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Joined: Apr 09, 2007
Answers
2
Questions
0
Helped
2063
Points
5

I had the same problem and this procedure fixes it! First, unplug the power to the main base (answering machine) for 20 seconds. Plus it back in. Put the phone that says "not registered" in the main answering machine. It will say "press the find handset for 4 seconds". Do that. It will run thru a series of stuff and will find the handset. It works! Rich (jambones.com)

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How to activate a vtech phone
Instructions
    • 1Remove the battery cover from the back of the phone. Most models have a door that slides downward to reveal the battery compartment.
    • 2 Install the battery by inserting the connector on the battery wires over the pins in the handset battery compartment. The connector will only go on one way.
    • 3 Insert the battery pack into the compartment and replace the battery cover.
    • 4 Charge the phone by sitting it in the charger for a minimum of 16 hours on the first charge.
    • 5 Place the fully-charged phone onto the cradle of the base unit and wait for the display to show "PRESS FIND HNDST 4 SEC ON BASE." If the message does not come up, lift the phone off the base and put it back in the cradle.
    • 6 Press and hold the "FIND HANDSET" button on the base unit for approximately four seconds. The display on the phone will change to "PLEASE WAIT," then "HANDSET X REGISTERED."
    • 7 Test the phone by making a call.
Read full answer
Jul 14, 2014 • Vtech Lands Phones
0helpful
1answer

My Motorola electrify won't turn on or charge. It
maybe your battery or your phone os .... try a new battery if nothing happens... try re flash your phone
Read full answer
Jun 02, 2013 • Cell Phones
1helpful
2answers

I Recently bought a new BL - 4C Battery. One of m friends suggested that i drain the battery completely on the 1st day so I did! In the morning when I put it on charge and tried to start it up, it...
Try charging the battery overnight before turning on the cell phone in the morning.
Read full answer
Jul 18, 2011 • Nokia 6300 Cellular Phone
0helpful
1answer

My Samsung behold ran out of battery this morning and it was dead for an hour or two. After I plugged it in to charge for a couple minutes, it still wouldn't turn on. After several attempts of taking...
Sounds like a battery problem. Seems your battery is completely dead. Get your cellular provider to order you a new battery. That should fix your problem.
Read full answer
Jul 06, 2011 • Samsung Behold Cell Phone
0helpful
1answer

My Vtech IA5879 phine I installed a new battery and it has a battery icon in lower left corner of phone wiht and X thru it and charge light is flashing. It has been charging for a few hours. Is this...
some vtech phones put a chip in their phones and will not take an aftermarket battery...either that or its the wrong one for the phone...ive worked for a battery store for 3 years
Read full answer
May 04, 2011 • Vtech ia5879 Phone
0helpful
1answer

Brand new 8320 after his first night charging its not working
when you put the phone on the charger does it show a red light on the top of the phone?
if so your battery is dead, when the battery is charged the light turn green.
you may just have a bad battery. I would take it to where you got it and get another one or a new battery. also your charger could be not working
Read full answer
Jun 06, 2009 • AT&T BlackBerry Curve 8310 Cell Phone -...
0helpful
2answers

Vtech 2656 cordless phone battery not charging
You need to replace the battery pack. Wal-Mart, Best Buy, Circuit City and a few other stores may carry this battery. Just call them first so you don't make a wasted trip.
Read full answer
Mar 26, 2009 • Vtech V2656 Cordless Phone (vtechvt-v2656)
4helpful
1answer

My vtech 5825 screen says NOT REGISTERED and does not work
Place the handset in the charger and press find handset for 4 seconds.This will register the handset. do the same for other handsets.
Read full answer
May 16, 2008 • Vtech IA 5845 Dual Handset Cordless Phone...
1helpful
2answers

Vtech phones loosing connection to base
You are pretty close to the solution. The problem is the charge detection in the handset. All handsets on a cordless phone detect the battery level with an hexadecimal value in the memory. Each hex value equal a volt value of the battery. EX: 3.5v = 9B
3.6v = 9C 3.7v =9D etc... The problem is the hex value in your defective handset are all mess up. So 9B is not 3.5v anymore. Then your handset could last 1hr after foul charge or doesn't alert you before the phone goes dead due to low BAtt.
Read full answer
Mar 20, 2007 • Vtech i5808 Cordless Expansion Handset
0helpful
2answers

Not Registered Problem
I had the same problem and I JUST fixed it! First, unplug the power to the main base (answering machine) for 20 seconds. Plus it back in. Put the phone that says "not registered" in the main answering machine. It will say "press the find handset for 4 seconds". Do that. It will run thru a series of stuff and will find the handset. It works! Rich (jambones.com)
Read full answer
Dec 25, 2006 • Vtech IP5825 Cordless Phone
Not finding what you are looking for?

View Most Popular

IP5825 Cordless Phone

  • Lands Phones

Related Question

How to activate a vtech phone

  • Vtech Lands Phones

Related Topics

877 views

Ask a Question

Usually answered in minutes!

Popular Questions

Using the speaker on the base to make/answer calls

Vtech DECT 6.0 Cordless Phone with...

How do i enable call

Vtech CS5121 Cordless Phone

My vtech phone says line in use and the line is not in use. How do I fix?

Vtech Lands Phones

My phone says 'No Line' what does that mean?

Vtech Cordless 6041 Phone

My vtech cordless phone will not ring. message is ringer off. how to turn ringer on.

Vtech 5867 Cordless Phone

Top Vtech Lands Phones Experts

Cindy Wells

Level 3 Expert

6688 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

k24674

Level 3 Expert

8093 Answers

Are you a Vtech Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual
. IP5825 Cordless Phone Manual

IP5825 Cordless...

Loading...