Question about Washing Machines
Error code states drain/hose problem but seems okay. Says to do rinse/spin, hit second rinse to just spin out and empty water. Turn on "add a garment" and locked go on at same time. Says hit stop twice and unlocks, but again when you try to spin it out, both light up and nothing happens. Why did drain problem go off in the first place? Does not seem to be a drain problem. Only a couple months old and worked fine until now. Just get warranty service out? Thanks
F21 turned to Sd after I cleaned out the drainage filter then went back to F21 again when i tried to restart. This all started one week after the maintenace agreement office called and said my service warantee was about to end. As soon as it ended...so did the working device. I guess my next step is to ohm out the pump and prepare to replace it.
Hi, I think the first thing you need to do is check the pump and make sur ethe impeller inside the pump is actuall turning and in good shape. Something may have passed through and in the course, sheared off the impeller fins. Chekc closely... Thanks
Posted on Jun 06, 2009
REPL/ YOUR PUMP F 21 LONG DRAIN .. MAYBE JUST NEEDS TO CLEANED OUT
Posted on Nov 30, 2008
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Mar 02, 2015 | Kenmore Elite Oasis 27052 Top Load Washer
The door will remained locked while draining water. If during installation the washer was plugged in and turned on without water hoses attached, the washer may attempt to drain for 8 minutes before the door unlocks. Let the washer run until the door unlocks. Do not turn off the washer or unplug the washer.
Does water remain in the washer after the final spin?
If water remains in the washer after the final spin, then the door will not unlock. Select Drain/Spin or Spin Only to remove any remaining water from the washer. The door should unlock at the end of the cycle. For models that have Rinse/Drain & Spin, push the Extra Rinse button to turn off the rinse to remove excess water.
Is the door locked and the Add A Garment light on?
If the Add A Garment light is on, then the washer door will unlock after the Pause/Cancel button is pressed once. Pressing the Start button will restart the washer at the same point where it left off in the cycle.
Is the door locked and the Add A Garment light off?
If the Add A Garment light is off, then the washer door will unlock after the Pause/Cancel button is pressed twice. The door will not immediately unlock while the cycle is running due to a possible high-water level in the washer, high-water temperature, tumbling or spinning. It may take up to five minutes for the washer to stop spinning and draining before the door will unlock. You will hear the door click when it unlocks.
Trying to gain access into a locked door can be a bit frustrating. Upon researching your question I found some links that may help you unlock your washer door. I attached all links below. I hope this helps!
Jun 10, 2011 | Washing Machines
Jun 09, 2010 | LG WM2496H Front Load
Feb 18, 2010 | Maytag MAH8700A Front Load Washer
Oct 21, 2009 | Kenmore Elite 45986 Front Load Washer
Aug 28, 2009 | Kenmore Washing Machines
Jul 01, 2008 | Washing Machines
Apr 03, 2008 | Kenmore 46462 Front Load Washer
445 people viewed this question
Usually answered in minutes!