My phone has two handsets. Both handsets have suddenly stopped working. The speakerphone on the base works. Both handset screens show readouts and if I dial a number the screen shows the seconds being ticked off--but no dialtone or any sound on either handsets. The mute is off. Privacy is off. Everything is plugged in and the charge light is lit when the handsets are on their bases. Any ideas would be greatly appreciated.
This sounds like the register-deregister problem elsewhere on this page. Try holding down the "end" and "#" buttons for about 6 seconds to deregister the phones and then reregister them. I had this problem too and it worked for me.
486 views
Usually answered in minutes!
The base to my Uniden DCX131 (+2) stopped working and my friend gave me her old base (+2) of the Uniden D1660. Can I pair the DCX131 handsets to the D1660?
uniden cordless handset phone #2 shows handset out of range and searching
i used the handset 2 days ago and then yesterday I looked at the charging base the charge light was not on so I picked up the phone and it is dead any suggestions, this is the only charging base I have
my uniden dect4086 cordless phone clock repeatedly loses time despite resetting and replacing handset battery and base being plugged in constantly
My cordless Panasonic model # is KX-TG6531 and want to switch the base handset *1kitchen to*2 bedroom. Can the *numbers be changed or switched around?
Have pressed find/hs button on base; display shows "paging" and "in-use" button on base lights up. Can't find the bloomin handset; do you have any other suggestions?
how do i delete a handset on the intercom list of my uniden cordless phone
It's been working great up until now. Does it need major surgery?
×