Printer stopped working. Both grn and red lights come steady on, then both go off, then both flash fast and then the pattern repeats. I can find no paper jam and there appears to be toner (I can hear it moving in the cassette when I shake it) -is there a way to reset the printer?
SOURCE: Not printing
Had the same problem - in the end it was that the paper drawer wasn't closed properly.
SOURCE: wont print on card stock, legal paper- keeps jamming
Menu> scroll to Paperhandling> MP Tray type>>(plain) try changing this to cardstock <enter>
instead of MP Tray type do the same for Cassette if you desire....
Best,
danakadan
SOURCE: error code 7410
Open the left side door, push in on the drum unit which is above the waste toner bottle until it clicks.
Turn printer off then on.
SOURCE: Kyocera Ecosys FS 920
There are actually some certain meaning on the red light and green
light showing different information to user. The summaries are:
1) Green On, Red Off = Printer Ready.
2) Green Fast-Flashing, Red Fast-Flashing = Printer warm up.
3) Green Fast-Flashing, Red Off = Printer off-line.
4) Green Slow-Flashing, Red Off = Processing Data.
5) Green Off, Red On = Cover Opened, Toner Empty or Developer Unit / Drum unit missing.
6) Green Off, Red Fast-Flashing = Paper Jam or waiting for jam reset.
7) Green Off, Red Slow-Flashing = Paper Empty or Paper tray is not inserted.
8) Green Off, Red Off = Printer power is off.
9) Green Very-Slow-Flashing, Red Off = Printer in sleep mode.
10) Green (any condition above), Red Slow-Flashing = Toner low or paper empty.
So what is your printer condition? Better know what is going on your printer so can solve the problem.
YBC (/\)
SOURCE: My Kyocera Mono Laser Printer is stopping between each page
call a service technician to clean the paper feed rollers... they aren't picking up the paper... this triggers the error so you have to stand there and manually reset the error and it prints...
I’m happy to assist further over the phone at https://www.6ya.com/expert/norman_d2fa496dce30c65d
540 views
Usually answered in minutes!
There is toner and it is inserted properly. You are right in that the motor action is not kicking in. I am beginning to think the drum went (the printer (and drum) is 7 years old. I"m told this model was discontinued years ago.
×