Hi, I would really appreciate some assistance on this problem.
The Maxx WFL 2061 motor accelarates (either for a wash cycle or spinning cycle) and then stops again. It continues to do this every 30 seconds or so.
I have tested with an empty drum to be sure it is not an "unbalanced load problem"
Thank you
Rodney
Hi ! I have problem with my Bosch Washer wfl 2061 .. It was running till stoped to
realease drain water out... But no drain water come out.. I have checked drain water host... Nothing thaere.. Water was still in the drum Tank... Whoever knows this problem , please kindly suggest or help me to do something.. Thanks.. Peace [email protected] , [email protected]
I nassume you mean that motor accerates to an uncontrolled speed.
check the motor tacho - mounted at the opposite end to the pulley. tacho consists of a circular magnet surrounded by a pickup. magnet may have unscrewed itself from the motor shaft
1,308 views
Usually answered in minutes!
Thanks for responding Tresilla.
What I mean is that the motor starts speeding up but before it gets to normal operating speed, it seems to loose power and slows down to a complete standstill. Every 30 seconds or so, it repeats this cycle.
I removed the tacho cover and the magnet is firmly mounted on the end of the shaft.
The pickup wires look ok.
Thank you
Rodney
manual
×