Hi, I have a GE 26936GE1-C 32-channel 900mhz call waiting ID and speakerphone cordless telephone. When I press the ?talk? button on my handset, it beeps 4 times and the handset display says ?no link to base? and ?ready?. The speakerphone base does get a dial tone and I can dial out on it but I can?t get a dial tone on the cordless handset. I have tried a new battery and allowed it to charge for 2 days before re-testing. I have moved it around to different phone outlets with the same results. I have checked to make sure that the base and the handset are the same model number and they are. The ?page? beep function from the handset going to the base does work but when I try to ?page? from the base to the handset, the handset does not beep. The Charge/In Use red indicator light on the base stays red only when the handset is in the cradle. I have double checked to make sure the battery is installed properly. I have done everything listed in the user?s guide troubleshooting tips section for ?no dial tone? and ?unit beeps? to fix it. Hopefully someone can help me. Thanks in advance.
I have the same problem as Mmmmmm experienced. No dial tome from the handset and the message is "out of range" from the base even when the handset is just foot away from the base. The base speaker phone works fine. The battery is the right one and is fully charged. Please! Someone helps me!I have the same problem as Mmmmmm experienced. No dial tome from the handset and the message is "out of range" from the base even when the handset is just foot away from the base. The base speaker phone works fine. The battery is the right one and is fully charged. Please! Someone helps me!
AnonymousJun 14, 2008
Hello, I have a GE 900 mhz cordless phone with model no. 26936GE1-C. everytime I push the TALK button, the handset will beep 4 times and will display NO LINK TO BASE. I took the battery off the handset and put i back again hopefully to reset the unit. It didn't work. the base cradle unit is working okay as i can use it to call a number except for the handset. It seems the handset and the base unit are off its frequency. please help. thanksHello, I have a GE 900 mhz cordless phone with model no. 26936GE1-C. everytime I push the TALK button, the handset will beep 4 times and will display NO LINK TO BASE. I took the battery off the handset and put i back again hopefully to reset the unit. It didn't work. the base cradle unit is working okay as i can use it to call a number except for the handset. It seems the handset and the base unit are off its frequency. please help. thanks
AnonymousJun 14, 2008
I got the same problem with my GE 900 mhz cordless speakerphone( model no. 26936GE1-C), everytime i push the TALK button it beeps 4 times and the display will read NO LINK TO BASE. The base station is working okay except for the handset. Please help. thanksI got the same problem with my GE 900 mhz cordless speakerphone( model no. 26936GE1-C), everytime i push the TALK button it beeps 4 times and the display will read NO LINK TO BASE. The base station is working okay except for the handset. Please help. thanks
AnonymousMar 17, 2014
a loud beep comes on only once in a while when i am on the phone this did not occur this time when the pone went compltely deada loud beep comes on only once in a while when i am on the phone this did not occur this time when the pone went compltely dead
AnonymousMar 20, 2014
whats wrongwhats wrong
AnonymousMar 29, 2014
I have Siemens Gigaset C 67H - it's cordless handset is asking for registration...if I press menu key it gives a message please confirm registration - then I get a message of - hold base page wait for beep - none of the other functions are working. can somebody help how to solve this.I have Siemens Gigaset C 67H - it's cordless handset is asking for registration...if I press menu key it gives a message please confirm registration - then I get a message of - hold base page wait for beep - none of the other functions are working. can somebody help how to solve this.
You can't post conmments that contain an email address.
Re: Handset No Link To Base error and no dial tone
My battery is a Ni-Cd. I bought it new on eBay (TL26554 battery number). I allowed the new battery to charge for a long time and then tried to see if it would work. But no go....the handset gave me the same error message. Good Luck to you too! Mmmmmm
Re: Handset No Link To Base error and no dial tone
I have the problem. I think it is because the battery i have in it was a Ni-MH and it should be a Ni-Cd. I am now looking for the right baterry Good luck Frank [email protected]
I need a replacement part for the phone model 26955 cordless handset and corded speaker phone. The part is called a handset hook that is used to hang this phone on the wall.. I would like to purchase this piece for the missing piece that did not come with my phone. Can you help me find this piece.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
When you pick up your GE cordless phone and press a button, the phone
should beep as a confirmation that a button has been pressed. If the
telephone handset does not beep, or if it does not respond to any
buttons, the battery may be in need of a recharge. Verify that the
cordless phone base unit is plugged in to an electrical source, then
place the handset into the charging cradle. If no lights illuminate on
the phone, or if charging fails to correct the issue, clean the metal
charging contacts on the cordless handset and place the phone back on
the charger. If it still fails to respond or to charge, the unit may
need to be serviced or replaced.
Does the Battery Hold a Charge?
If the cordless phone charges up and appears to be ready for use but
dies after only short periods of use, the internal rechargeable
batteries may need to be replaced. Replacement batteries are widely
available at electronics
and discount retail stores. Note your phone's exact model number, as
this number will be necessary when purchasing a replacement battery.
Listen for a Dial Tone
If the GE cordless phone powers on, and beeps when you press keys, but
no dial tone is heard, one of three problems is the likely culprit. The
phone's batteries may have an insufficient charge to fully power the
phone, a condition that can be corrected by simply placing the phone
back in the charger. If the batteries are charged, but no dial tone is
heard, it is also possible that another telephone in your home or
office is "off hook" or in use; verify that all telephones, fax
machines and modems are securely on the hook. If there is still no dial
tone, your telephone service may have been disconnected or require
service by your local telephone company.
Listen for Static
On some GE cordless phone models, particularly older models, static may
be heard if the radio signal between the handset and base unit
experiences interference. Common sources of interference include
unshielded electronics, appliances, and radio transmitters, as well as
high-tension power lines. If your phone offers an option to change
channels, try several different channels to see if the static is
eliminated. If static continues to exist, or if static can be heard on
wired phones sharing the same line, your telephone line may require service.
Verify Your Handset is Registered
Some models of GE cordless phones may display a message on the display
screen that the handset needs to be registered. If this message
appears, move the handset close to the base unit and press the
"Prog/Mute" button near the bottom of the handset. Next, press the
"Pager" button on the base unit (your handset may instruct you to
perform this step). Finally, press the "Prog/Mute" button on the
handset one more time to complete the registration process. Your GE
cordless phone should now work correctly.The GE Cordless Phone brand is designed to deliver the conveniences of
cordless home service with quality sound and features. There are many
models of the GE Cordless Phone. The most current models, including the
DECT 6.0, have standard features such as call waiting, caller ID,
visual ring indicator, phone number memory and digital answering systems .
Before
you use your GE Cordless Phone, ensure that you have all the parts.
Your cordless phone package should include the phone base, a handset
battery pack, a battery compartment cover, the cordless handset, a wall
mount bracket, and a telephone line cord and AC power adaptor. Once you
have confirmed that you have all of your parts, insert the handset
battery pack into the handset and replace the battery compartment
cover. Insert your telephone line cord and the AC power adapter into
the phone base. The phone base identifies the telephone line as TEL
LINE and the adapter as AC. Plug the phone base into the electrical
socket. Place the cordless handset into the base. Allow the phone to
charge for at least 16 hours before its first use. Failure to fully
charge the battery before its first use will result in poor battery
performance.
Once you have fully charged your phone, you can proceed with setting up
your phone's features. If your cordless phone includes an answering
system, complete this setup process first. Turn on the answering system
by pressing the on/off button. The message indicator light will
display. The cordless phones
are defaulted to English as the selected language. To change your
language preference, press the "Skip" button for two seconds. The
language will change to Spanish. Next, you will set up your voice time
and day stamp. While the answering system is on, press the "Answer"
button on your handset for two seconds. The phone will enter the
answerer mode. Press the "8" key. This will take you to the time/day
setup menu. Use the number keys to set the hour and minutes. Use the
volume up and down arrows to set the AM/PM. Press "#" to save. The
cordless handset will also require that you give it a name. Press the
"Mute" button for two seconds until the handset reads "ENTER NAME."
Enter the name of the handset by using the touchtone keypad. Press the
"Mute" button to save. Enter the default area code by pressing "Mute"
until the phone displays "AREA CODE." Enter your three-digit area code
and press the "Mute" button to save.
GE Cordless Phones are designed to be simple and convenient to use. To
place or answer a call, press the TALK button. You can pre-dial a
number by dialing the number before pressing the TALK button. When you
are ready to make the call, press TALK and the phone will dial
automatically. To answer a call that is waiting on the other line,
press the FLASH button. If you experience call interference or bad
reception while on a call, press the CHANNEL button until your line
clears
The GE Cordless Phone
brand is designed to deliver the conveniences of cordless home service
with quality sound and features. There are many models of the GE
Cordless Phone. The most current models, including the DECT 6.0, have
standard features such as call waiting, caller ID, visual ring
indicator, phone number memory and digital answering systems.
Before You Start
Before you use your GE Cordless Phone, ensure that you have all the
parts. Your cordless phone package should include the phone base, a
handset battery pack, a battery compartment cover, the cordless
handset, a wall mount bracket, and a telephone line cord and AC power
adaptor. Once you have confirmed that you have all of your parts,
insert the handset battery pack into the handset and replace the
battery compartment cover. Insert your telephone line cord and the AC
power adapter into the phone base. The phone base identifies the
telephone line as TEL LINE and the adapter as AC. Plug the phone base
into the electrical socket. Place the cordless handset into the base.
Allow the phone to charge for at least 16 hours before its first use.
Failure to fully charge the battery before its first use will result in
poor battery performance.
Phone Setup
Once you have fully charged your phone, you can proceed with setting up
your phone's features. If your cordless phone includes an answering
system, complete this setup process first. Turn on the answering system
by pressing the on/off button. The message indicator light will
display. The cordless phones
are defaulted to English as the selected language. To change your
language preference, press the "Skip" button for two seconds. The
language will change to Spanish. Next, you will set up your voice time
and day stamp. While the answering system is on, press the "Answer"
button on your handset for two seconds. The phone will enter the
answerer mode. Press the "8" key. This will take you to the time/day
setup menu. Use the number keys to set the hour and minutes. Use the
volume up and down arrows to set the AM/PM. Press "#" to save. The
cordless handset will also require that you give it a name. Press the
"Mute" button for two seconds until the handset reads "ENTER NAME."
Enter the name of the handset by using the touchtone keypad. Press the
"Mute" button to save. Enter the default area code by pressing "Mute"
until the phone displays "AREA CODE." Enter your three-digit area code
and press the "Mute" button to save.
The Basics
GE Cordless Phones are designed to be simple and convenient to use. To
place or answer a call, press the TALK button. You can pre-dial a
number by dialing the number before pressing the TALK button. When you
are ready to make the call, press TALK and the phone will dial
automatically. To answer a call that is waiting on the other line,
press the FLASH button. If you experience call interference or bad
reception while on a call, press the CHANNEL button until your line
clears.
jQuery('.article ol .image').each(function(i,e){
var $this = jQuery(this);
$this.find('img').error(function(){
jQuery(this).remove();
$this.remove();
});
});
Another tip is to remove the battery from the handset for at least 5 seconds. You might want to get a voltage meter and check the voltage on that new battery - maybe it isn't charging properly.
Normal
0
false
false
false
MicrosoftInternetExplorer4
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman";
mso-ansi-language:#0400;
mso-fareast-language:#0400;
mso-bidi-language:#0400;}
Ge Telephone Solutions Handset can not link. • If any handsets become inoperable, place it on the main base
cradle for 20 seconds to re-register. No dial tone • Check or repeat installation steps • Make sure the base power cord is connected to a working
electrical outlet. • Make sure the telephone line cord is connected to the base unit
and the modular phone jack? • Disconnect the base from the wall phone jack and connect another
phone to the same jack. If there is no dial tone on the second phone, the
problem might be your wiring or local service. • The handset might be out of range of the base. Move closer to
the base. • Make sure the battery is properly charged (for 16 hours). • Ensure the battery pack is installed correctly. • Did the handset beep when you pressed the TALK/CALL BACK button?
Did the in use indicator come on? The battery may need to be charged. http://www.home-electronics.net/ge/pc/IB/25922GE2_IB.pdf
Sounds like a defective battery or low battery.
1. Have you replaced the battery?
2. Have you changed the channel?
3. Have you dropped it?
Answer these few questions and we'll see if we can figure it out.
Let me know.
I
was having the same problem with the same model phone, and fixed the problem by rebooting the phone – unplugging the
AC and phone cord from the base station and plugging both back it, then removing and replacing
the handset to regenerate the security code.
2/29 Have you registered or re-registered the handset?
"No link" can mean handset is not accepting radio wave of base unit. At Mfgr website pull-down operator's manual and look for registration instructions. Some sequence of buttons will create a radio signal from base (have handset off base) then another sequence of buttons on handset will accept radio signal. If handset has "menu" button, try "menu", then "00" (zero zero) then select an accept or "OK" button. Good luck.
brand is designed to deliver the conveniences of cordless home service
with quality sound and features. There are many models of the GE
Cordless Phone. The most current models, including the DECT 6.0, have
standard features such as call waiting, caller ID, visual ring
indicator, phone number memory and digital answering systems.
I have the same problem as Mmmmmm experienced. No dial tome from the handset and the message is "out of range" from the base even when the handset is just foot away from the base. The base speaker phone works fine. The battery is the right one and is fully charged. Please! Someone helps me!
Hello, I have a GE 900 mhz cordless phone with model no. 26936GE1-C. everytime I push the TALK button, the handset will beep 4 times and will display NO LINK TO BASE. I took the battery off the handset and put i back again hopefully to reset the unit. It didn't work. the base cradle unit is working okay as i can use it to call a number except for the handset. It seems the handset and the base unit are off its frequency. please help. thanks
I got the same problem with my GE 900 mhz cordless speakerphone( model no. 26936GE1-C), everytime i push the TALK button it beeps 4 times and the display will read NO LINK TO BASE. The base station is working okay except for the handset. Please help. thanks
a loud beep comes on only once in a while when i am on the phone this did not occur this time when the pone went compltely dead
whats wrong
I have Siemens Gigaset C 67H - it's cordless handset is asking for registration...if I press menu key it gives a message please confirm registration - then I get a message of - hold base page wait for beep - none of the other functions are working. can somebody help how to solve this.
×