Screen stuck my 3.5 2100 gets stuck soon as i go to turn it on .

Remove the battery and do a factory reset as soon as it starts

Same here. New fault. I make a call or a call comes in. When the party hangs up or I end call ... car screen show call in profess ... sometimes it will goes back to home and sometimes not. My phone is not stuck I can make the next call. Calls ends but the highlander screen does not show call ended. The end call sound pa=lays but still screen shows it is stuck in the call ... even when using the phone to make the next call. Frustrating because this was not the case until all of a sudden. I checked for update, disconnected and reconnected etc etc

Hi Christi,

Inconveniences regretted, let me try to help you. I need more information about the Model and the issue.
Please let me know the Model name of the Tablet .
Also, elaborate the issue, May I know if the Tablet stuck as soon as you turn it ON?
Have you updated any software before this issue?
Had you tried to root it?

Thanks!

Know what the ->enter BIOS Setup key is?

It's on the bottom of the computer manufacturer logo screen.

Got it?

Now press the CTRL and ALT and DELete keys at the same time.
Restarts the computer.

JUST AS SOON AS IT STARTS, start tapping on the enter BIOS Setup key.
Tap in 2 seconds intervals.

If you hear beeps ignore it. These are Stuck Key Error Code beeps, and it is you that is making them.

Still No?
Turn the computer off by holding the Power On button in, for 10 seconds.
WAIT 20 seconds, then press the Power On button.

AS SOON AS YOU PRESS the Power On button, start tapping on the enter BIOS Setup key. The rest is above.

Regards,
joecoolsvette

[The time period to enter BIOS Setup goes by F-A-S-T!
As soon as you see the computer manufacturer 'splash screen', (Logo screen), it may be TOO late. The above method makes sure you get in BIOS Setup ]

i may have fixed it. i have the same problem with my Casio Type-S on getting stuck on registering applications. i found that as soon as your keyboard lights up right before phone vibrates hold down the clear and the power button at the same time as soon as the keyboard lights up. it will for some reason by pass the app and work. but i had to keep doing it every time i turned my phone off and back on.

I may have fixed it. i have the same problem with my Casio Type-S on getting stuck on registering applications. i found that as soon as your keyboard lights up right before phone vibrates hold down the clear and the power button at the same time as soon as the keyboard lights up. it will for some reason by pass the app and work. but i had to keep doing it every time i turned my phone off and back on.

Follow the steps below,

Step 1: Shut down your PC completely.
Step 2: Turn on the Power button.
Step 3: As soon as you turn it on start hitting the F8 key on your keyboard until you get to a black screen called "Windows Advanced option". (If you don't get to that that screen but you end up reaching the blue screen than that means you have delayed in hitting the F8 key. start again from step 1.)
Step 4: As soon as you reach "Windows Advanced option" use your down arrow keys to choose an option called "Last know good configuration".
Step 5: Select that and HIT ENTER.
Step 6: your PC will boot to the windows.

You need to launch the Last know good configuration to get this fixed.

Follow the steps below,

Step 1: Shut down your PC completely.
Step 2: Trun on the Power button.
Step 3: As soon as you turn it on start hitting the F8 key on your keyboard until you get to a black screen called "Windows Advanced option". (If you don't get to that that screen but you end up reaching the blue screen than that means you have delayed in hitting the F8 key. start again from step 1.)
Step 4: As soon as you reach "Windows Advanced option" use your down arrow keys to choose an option called "Last know good configuration".
Step 5: Select that and HIT ENTER.
Step 6: you PC will boot to the windows. If this fails then you need to perform repair install using the Operating system CD.

ohh i think you have to repair your screen soon...and plz use a pen or thin stick to turn on your cam

Return it immediately