I need a driver for the scanner perfection 610 for windows vista

Hi!

You need to go to www.support.epson.com select your scanner and download the software that will work with your Operating System.

Hope this helps. Keep me posted.

Please go to this page and download the drivers for Vista. Well over 90% of Vista Drivers work perfectly for Windows 7, BUT! not 100%. I've solved many driver issues for local customers this way and I hope it works for you.

http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&oid=20882&prodoid=27766185&infoType=Downloads&platform=All

Regards,

Selk

this is pretty ancient model, but... you can try to use winxp twain driver and it should work, your registry most probably will need bit of tweaking... version which will most probably work is TWAIN Driver v5.53A,

follow this procedure, disconnect your scanner from computer, run ccleaner to clean all rubbish, including registry clean.

download twain driver and then run it, force vista to accept it, reboot your computer. connect scanner and you will have then warning from vista about digital signature, disregard it and force install software. scanner should work.

i still would suggest newer version...

Yes this scanner will work with Windows Vista, and you just need to download the driver for this for it from this link.
http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=14548&prodoid=6464128&BV_UseBVCookie=yes&infoType=Downloads&platform=Windows&x=28&y=14

Hello !

Unfortunately, there is no free solution to your problem. No Vista driver has been written for your scanner.

But, there is a solution. Vuescan has a product here:
http://www.hamrick.com/ It does cost $39.95, but there is a free trial.

Hope this helps.

From here you can download the drivers ...
http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=14559&infoType=Downloads

Cant find such a scanner, are you sure of the model "performance", If it is not Vista compatable, ie if Epson have not released a Vista driver, then it is not going to work with Vista.

See Epson web and download driver if available, if not change scanner or operating system or purchase software

Check your Epson product CD to see if it already contains Windows Vista drivers. If the CD indicates support for Windows Vista, follow the instructions that came with your Epson product to install your driver and other software.

If your Epson CD does not indicate support for Windows Vista, DO NOT INSERT YOUR EPSON PRODUCT SOFTWARE CD IN YOUR WINDOWS VISTA COMPUTER because the setup program is not compatible with Windows Vista. Instructions for installing additional software from your CD may be available with your driver download.

Note: If you already have ArcSoft PhotoImpression™ 5 installed on your Windows Vista computer, you may need to install a "patch" program. Go to the ArcSoft website to download and install the patch.

Products that are not Vista compatable are not capatable with Vista, who would figure hey!!

Go to the HP website and under the support section see if there is a windows vista driver available for your model #. If there is then download & install. Scanner should then work. Hope this helps & please remember to rate my answer. Thanks.

Perfection 1200U Photo Scanner for Vista

go to UMAX 4100 scanner installation CD that comes with the scanner and find the setup.exe file and on it clik left mouse and then right mouse and choose properties and then choose "Install in WinXP-Sp2 compaitibility mode" ...Thats its . Then it will install in Visa and will work perfectly. Only when you startup the Vista it gives you some error message "incompitable Os" etc ..just cancells the message ..and your Umax 4100 Scanner will work perfectly.

Ray