Power button just flashes. I took it apart to clean the lenses and now it does not work. The power button flashes 8-7 or 7-8 times.
SOURCE: RCA 61" Model P61960 stopped working
You have a flyback transformer and horz output transistor bad
SOURCE: my 60 inch rca rear projection tv will not come on
i have had same problem repairman states splitter is bad has an upgrade for $350.00 the next time repaior man could not find part,,advised he would have to replace entire box this cost $275.00 and also states thiis would be a later model than my original box,the picture is great never been this good.note when i say box i ment the box inside tv with all the electronice and projector
SOURCE: RCA D52W20 52 in. Rear Projection HDTV power light blinking
Liz, yes it is a power supply problem, better question is; low voltage or high voltage power supply ? count the blink code, it should repeat the code, once you have the code call your local tv shops and give them the model number of your tv and the blink amount and they`ll tell you price to fix, gl, video-tek
SOURCE: I have a RCA R56wh78 projection power button flashing green.
Thats the classisc sign that the CP150, CP114 and CP120 capacitors need replacement. You can get the repair kit called CP150, CP120 and CP114 at www.tvrepairworld.com which contains the capacitors and the CD with step by step instructions on how to do the repair.
Testimonial: "Thank you. I will try this. I just dont understand why it worked with all of the button pushing on the front of the tv. Is this going to be a hard job"
SOURCE: I have a RCA D52W17 rear projection T.V. When I
Hi
Thanks
for using FixYa. 3 blinks in your RCA D52W17 rear
projection are caused due
to 3 capacitors (CP114, 120 and 150) which are located on the deflection board.
If any of these capacitors goes bad you’ll have to replace them with the exact
same ones. Please
do rate the solution if the issue is resolved or post a comment for further
assistance.
Thanks
Rylee
75 views
Usually answered in minutes!
×