Wash enhance & on/off flashing

Refer to your manual if you have one, if not, your machines filter may be full of lint or coins or other stuff. It is located at the bottom of your machine, just turn the nozzle and prepare for some water to escape, unscrew it, clean it all out and replace it, see if that helps... good luck

try to change the 2 carbon brushes from motor.

it is either a broken wire to your heating element or the element itself is open circuit. when the water does not heat the machine will not move onto next stage of wash.

this has happend to my washing machine could u please tell me how to unblock the pump

wash enhance and on/off button flashing on washing machine'

In your browser bar, type in

HOTPOINT.CO.UK
Click on -----------After sales
Click on------------Download instruction books
Enter model number details in box.
Please rate my solution.
Thanks.

You can retrieve a complete owners manual if you go to the manufacturers site, under"support" you'll see downloads, type in your model # and it will come through as a type "pdf." file to keep on your computer forever.

i'm having same problem people have said empty filtter but i have done that and the water is running out but still flashing
so sorry wish i could help.

You have a bad printed circuit board (PC board). You will have to replace. I would rate this job a 4 on a hardness scale from 1 to 10. You will need your model number located on the back of the console toward the top. Go to this site and enter your model number. You can order it with a credit card 24/7 http://www.partselect.com/

Please rate this solution if helpful.

my hotpoint Aquarius wf340 when switch on 5 secs later on/off button flashing along with mini load lights. could u tell me the error codes for this machine?