Try the following codes until one of them work:
002, 003, 004, 005, 006, 007, 008, 044, 045, 046, 053
Follow these steps to program the remote control.
- Turn on the component to be programmed.
- On the remote control, press the SET button.
- Press the appropriate component button for the component being set up.
- Using the number pad, enter the component's manufacturer code.
NOTE:
If more than one code number is listed for the manufacturer, repeat the
procedure, entering one code at a time until you find one that works.
- Press the ENT button.
- Point the remote control at the component.
- Press the POWER button to verify operation.
NOTES:
- If a new code number is entered, the code number previously entered will be erased.
- When the batteries are replaced, the programmed codes
may be erased. It may be necessary to reprogram the remote after
replacing the batteries.
- The operation of a combination deck of any kind is not guaranteed.
- Some product functions may not be able to be controlled
by the remote control. Use the remote control provided with the
component.
- If none of the codes listed for the manufacturer work,
it may be necessary to try codes listed for other manufacturers or
perform a search for the correct code. Consult the Operating
Instructions provided with the remote control for steps on searching
for the correct code.
- In some rare cases, you
may not be able to operate your non-Sony equipment with the supplied
remote control. This is because your equipment may use a code that is
not provided with this remote control. In this case, please use the
equipment's own remote control.
Does anyone have the codes for a jcpenny tv for a sony rm v310 remote
×