Cannon MP170 I Have cannon mp170 series printer. it comes up with Black ink low all the time when the cartidge is still full. whats the solution to fix this problem?

hi i hope it works

try these Procedure

Reset Cannon Mp170 Reset

view full content : http://ccabong26.blogspot.com/2011/12/reset-canon-mp170-printer-model.html

Hello,

There's still hope for your printer. Just download the MP170 update driver support for Windows 7 from your printer manufacturer.

I've already taken the liberty to search the driver for you. Click here. Just put in Windows 7 on "Select OS".

Hope this helps. Thank you for using Fixya.

Hi there,

The 6500 error code is a logic board error code. The PCI Bus error is detected by the ASCI. Sounds like it needs new logic board. but i suggest you to first of all you can try to reset your printer -

1. Turn the printer off with the Power button (if available).
2. Disconnect the data cable from the printer.
3. Unplug the printer's power cord for approximately 10 minutes, and then plug it back in. 
4. Turn the printer back on. If this works you're done, if not try the next step.

1. After confirming that the printer is powered on, open the paper output tray.
2. Open the top cover and wait until the print head moves to the center.
3. Open the inner cover and check that ink tanks are properly seated.
4. Properly seated
5. Press down on each ink tank until a click is heard.
6. Close the inner cover and top cover

if reset method not works for you then you go for the new logic board replacement .............

Thanks.................

Replace or refill the VO51 in cartridge, it's out of ink.

tray here

Canon PG-40 Black
High Capacity Canon PG-40 Black Ink Cartridge
Pixma Series: iP1600/ iP1700/ iP1800/ iP1180/ iP1200/ iP1300/ iP1880/ iP2200/ iP2500/ iP2580/ iP2600/ MP150/ MP160/ MP170/ MP180/ MP450/ MP460/ MP470/ MP470SE/ MP140/ >>>>MP145<<<<
MP210/ MX300/ MX308/ MX310/ MX318/ iP6310D

Canon CL-41 Color
High Capacity Canon CL-41 COLOR Ink Cartridge
Pixma Series: iP1600/ iP1700/ iP1800/ iP1180/ iP1200/ iP1300/ iP1880/ iP2200/ iP2500/ iP2580/ iP2600/ MP150/ MP160/ MP170/ MP180/ MP450/ MP460/ MP470/ MP470SE/ MP140/ >>>>MP145<<<<
MP210/ MX300/ MX308/ MX310/ MX318/ iP6310D

My Cannon MP170 only prints in black. The color cartridge is not printing.
[email protected]

I HAD THE SAME PROBLEM WITH THIS SAME PRINTER THE ANSWER IS THE INK OVER FLOW SPONGE IN SIDE THE PRINTER IS MOST LIKELY FULL NEED TO BE CLEANED OUT

not sure how we install the cannon to the pc and make it print.

Maybe the USB cable was plugged before the driver has been installed : I noticed this advice in my manual.