E4 comes up on panel saying clear paper jam

If you check closely, you may find there is a small piece of paper trapped between the rollers?
Good Luck!
https://magicinkjetflush.com

E4= paper jam. Check all your feed areas and make sure they are clear. Then reset your printer and begin you print again. If all areas are clear and your still getting an E4 reading you may have damaged a sensor clearing a previous paper jam. If a reset wont clear your error then your printer may need to be repaired. It would probably be cheaper to simply replace your old printer for a new one. Hope this helps Shannon

Hi
Try disconnecting the printer completely from power and from the PC.
Reboot the PC.
Connect everything again.
Clear any print queues.
Make sure the paper feed tray is not filled to capacity.

Hope it helps.

Hi,
Looks like you have a paper jam problem.Pieces of paper are stuck in the roller.Go to Control Panel ->Printers and Fax -> Select you printer and click properties.You will find a Printer Maintainance Wizard,which will have a paper jam clearing wizard.Click this and your printer will work as good as new.
Thank You.

Clearing a paper jam in a Lexmark laser printer is an easy thing to do. Laser printers produce high-quality products and are fairly complex machines, but paper jams (in most cases) can be solved mechanically with a little know-how and time. Follow these steps to learn how to clear a paper jam in a Lexmark laser printer.

1. ep 1 Take the paper out of the paper trays. This will prevent any more paper from being drawn into the printer to further the jam.
   
2. Step 2 Remove the cover from the housing of your Lexmark laser printer. This will expose the inner workings of the printer, and you also should be able to see the jammed paper.
   
3. Step 3 Pull gently on the jammed paper. In many cases this is all that is required; the paper jam should move out slowly and smoothly.
   
4. Step 4 Press the flashing paper jam button. This will allow the rotors to turn freely, which will facilitate the easy removal of the jam.
   
5. Step 5 Unplug your Lexmark laser printer if the jam persists. This will allow you to pull more firmly without the gears working against you.
   
6. Step 6 Examine the inner workings and confirm that all paper and shreds of paper have been removed. If the paper tore during the clearing, make sure none remains or it will inhibit normal printer function.
   
7. Step 7 Plug the printer back in, refill the paper tray and try to print again.
   
   • Make sure to use a printer and paper type that are compatible. Consult your owner’s manual and the manufacturer’s Web site.
   • To deal with a large jam, it might be necessary to pull sheets from the middle of the jam in order to loosen the whole thing.
   • Always pull the paper “with the grain” of the mechanism, if possible. Pull it through the printer the way paper normally travels so that you don’t go against the gears.
   • For more serious repairs, contact an electronic store or professional repair person.

well try unplug it and unistall drivers and install an see

hp f 4235

Don't know if it's the same problem i had but its maybe worth a try. Canon MP160
My paper went in a little, the wheels were turning but it didn't take the rest of the paper or print.
Someone replied to my problem, i tried it and it fixed 1st time. Also seems to of worked for others

Solution:- Use a piece of thin card, a magazine cover is what i used, make sure its A4 size then try to print something, as the paper starts moving push it through! and hey presto it worked for me, everything printing fine now

Requires new rollers

you are a genius, it WORKED!