What is error code H2-00?
U have a dirty thirmistor in fusr unit.first clean it.then do this procedure.press clear key,auto photo key,clear,auto photo key in a sequence.copier will go dead .when display goes dead just press 14 start key.copier will take few second and will bi ok.by MIAN AKHLAQ
The simulation cod aply
C- exposer-C exposer =14 /16= copy batten
ok
SOURCE: How do you reset Admin on a Toshiba e-studio 162D
In the manual it says to "Turn on power while holding down the status button on the network expansion kit. Continue to hold down the status button until a beep sounds."
It looks like the default password was TOSHIBA which took me forever to find. The user name should just be admin.
SOURCE: The error indicator is staying lit constantly on Toshiba e-studio
The drum counter reaches 25000 copies , it's time to change the drum and reset counter .
Enter the reset mode by pressing : # - * - c - * .
then press : 20 - start -01- start - CA - CA .
Hope this will help .
The e-STUDIO162 Series can do GDI printing out of the box. It can do PCL printing if the optional GA-1170 controller is installed. The GA-1170 is attached to the back of the MFP and connects to the USB port. Postscript printing is available if the Postscript option has been installed on the GA-1170.
Good luck
995 views
Usually answered in minutes!
×