Jenn Air JMW8530CAB time/temperature light don't work

It's faulty and in some sort of self protect mode. You need a service call or you can try some of the fixes here.

FIXED - WW2780 Jenn-air oven keeps shutting off ...

www.applianceblog.com > mainforums > threads > ww...

Feb 15, 2012 - Hi.... I have a Jenn-air oven model WW2780 that keeps shutting off after being turned on, almost always during the preheat. From what I have ... Missing: WW27430P ‎' Must include: WW27430P

Jenn Air Range Stove Oven - Oven Won't Turn Off - Repair ...

www.repairclinic.com > RepairHelp > Jenn-Air-Oven-...

Here are the most common reasons your Jenn Air oven won't turn off - and the ... Enter model number to search for the required part specific to your product.

HOW-TO: Jenn-Air Oven WW27430P Door won't close

www.appliancepartspros.com > repair-help > ww27430...

Door won't close is the most common symptom for Jenn-Air WW27430P. ... I have a Jennair jjw9630cas double wall oven, and after a few years I noticed that the light would not go out, first in the bottom ... Door pulls shut and li8ght stays off.

HOW-TO: Jenn-Air Oven WW27430P Won't start or doesn't start

www.appliancepartspros.com > repair-help > ww27430...

How to Replace Oven Temperature Sensor Kit for Jenn-Air WW27430P Won't start # ... Jenn Air stove JDS9860CDB00 error code 1d11 oven not shutting off. ... Very easy on this and other models with this sensor-- just two screws holding it in ... Rating: 5 · ‎123 reviews

..

My Jenn Air has the same problem with the computer touchpad. The only temperature I can get to work is from the left hand column, 411 degrees. I don't want to waste another dime on this oven. I've read so many complaints from other owners. No more Jenn Air products for me.

How many Amps for the Jenn-Air Wall Oven w30400B ?

Could be a fuse or a bad control panel. Unplug the oven, take the panel off of the back and look for fuses. If none, call Maytag or supplier of Jenn-air oven controller for a replacement.

Hi, this will happen over a period of time and its just heat related. the control panel isn't insulated properly and , there has been a larger than normal transfer of heat to the inside of the control panel where the circuits are housed.

If this is a problem, i recommend replacing the control board. it will fix the dim issue.

We own a Jenn-Aire model W27400W oven. The display module has gradually gone dim over a period of several months prior to the end of the warranty, and the display is no longer visible. It is apparent that several Jenn-Aire oven models use the same display. Does Anyone else have the same problem, and If so, are they willing to join a class-action suit against Jenn-Aire with us?
Steve Patterson
303-256-8494
[email protected]

The temperature setting must be set on "Cleaning" and the oven cooking dial to "Clean"; otherwise the door will not open and forcing will damage the mechanism. Also, before the door will open, the internal temperature must drop to a safe level and a red "cleaning" light must go off, after the temperature drops inside the oven.

then you will have to replace the eoc the electronic oven control as long as it was working id use it till it wasnt then replace it

get a new range