This is a Sears Kenmore 80 Series Heavy Duty Super Capacity Model 110.26892690 that we bought slightly used 5 yrs. ago. Machine fills with water but will not move to rinse cycle, won't spin or drain.
Check to make sure your lid switch is working.
SOURCE: I have a Kenmore 80 series, Model 110 26862501;
Hi from retired Englishman in SW France,
I would think that sort of information would be on the manufacturer's plate, probably at the back, and/or in the manual.
If you have no manual you will need to type into your search engine/web browser '(make model number) washer manual' and you should be presented with a number of sources from which you can either download for free or have to pay a nominal amount.
You could also try the manufacturer's web site direct ;-0)
If this has assisted you please consider a 4 thumbs up for the rating.
Thanks and good luck!
John C.
801 views
Usually answered in minutes!
Washer fills & agitates but won't spin or drain it clicks through the cycles but doesn't do any thing else.
After I had adjusted the water level to small load, the washing machine refused to spin or drain. It only works for water level now, but it still refuse to spin or drain.
Kenmore 80 series washer won't drain or spin. Machine had an overload of heavy pillows and now won't spin or drain.
need a wiring schematic for a sears craftsman heavy Duty 40 Amp Charger/225 Amp Engine starter Model 934 718460
×