Everything seems to function normally, its just that the microwave doesn't. i.e. nothing gets heated up. All lights/controls function normally. 18 months old and little used.
Q= my Microwave some time start and some time not; went push start swith it caming sound or click, click. thanks for your replying.
SOURCE: How do i change the
Hello,
You have to unscrew that five screws that hold the top and side casing. Two of the screws will require a torx screwdriver. Be careful when you access with the inner workings of the microwave. The bulb is held in place by two bent pieces of metal. Simply bend them open to allow the bulb to become free. Then replace the bulb and follow these steps in reverse.
SOURCE: Kenwood microwave (KEN GJ/SS25) heating doesn't work but grill works
Generally, the most common causes of a failure to heat are:
- bad door switches or door switch mounts
- loose connection at the magnetron
- problem or loose conneciton on the control unit circuit board
- bad magnetron or other high voltage part
If you or a friend decide to look into it, we have critical safety information, info on door switch diagnosis and replacement, and
disassembly information at our site, linked here on Fixya: http://tinyurl.com/yzjozk
SOURCE: I have recently bought a
The turntable system consists of the motor, the coupler, the turntable support with rollers, and the tray.
You can see and hear a video of how a turntable motor should sound when you rotate it by hand.
If
yours is not set to be off via the control panel, and it won't rotate
or it sounds like it's grinding, etc., you may have a bad motor or
plastic coupler.
To
replace either, you need to unplug power, then remove the bottom cover
of the oven.
For parts and service, you should contact Kenwood at the number in the owner's manual.
We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.
SOURCE: where can I get a
Most major manufacturers supply manuals
online so if you were to log on to the manufacturer's web site, you
may be pleasantly surprised as usually, if available, one is able to
download, by model number, Customer
Instruction Manuals, Dealer
Network for spare part supplies as
required. The information is normally free of
charge. I hope this helps.
Most major manufacturers supply manuals
online so if you were to log on to the manufacturer's web site, you
may be pleasantly surprised as usually, if available, one is able to
download, by model number, Customer
Instruction Manuals, Dealer
Network for spare part supplies as
required.
The information is normally free of
charge.
I hope this helps.
770 views
Usually answered in minutes!
I too facing the same problem.Same model.
having exactly the same issue!!!
×