I recently replaced my ink, it worked for a few weeks now it wont recognize my Cyan cartrige. It said to replace the ink, and I did, but still not working. I tried reseting the printhead cartrige, but this didn't resolve it. I have also tried reseating the cartrige many times and even tried to reboot the printer, but this isn't an option I guess. Very confused.
Make sure that you're using genuine Lexmark cartridges. If you are, try updating the firmware of your printer. Just go to http://bit.ly/ghfW8H to download the firmware update.
Reseat the printead again and the cartridges then reboot the printer. If it doesn't help, try replacing the cartridge.
Creating Customers For Life
SOURCE: My lexmark pro 205 says I need a new cartridge. I
Lexmark recognizes that some of our inkjet all-in-one customers
may be experiencing issues with their print quality. We take our
customer user experience very seriously, and we strive to ensure that each time
a customer prints using a Lexmark device the page is crisp, clear and up to the
highest standards. However, if your device is displaying a 'printhead error' on the
hardware and/or you are suddenly experiencing a print quality issue, please contact
the Lexmark Technical Support Center at 1-800-539-6275 or point your browser
to http://bit.ly/lFKDzs for online
technical assistance.
SOURCE: Full Cyan Cartridge Does Not Print At All in Lexmark C524
It could be that your PC is expired
"Photo Coductor"
SOURCE: Hello, I have a Lexmark
It may be possible that the printhead is defective. You may call Lexmark Technical Support at 1-800-539-6275 for assistance. You may also log on to www.lexmark.com and click on Support & Dowloads tab to chat or sent an email. You will need your printer purchase receipt and the printer's serial number. This is necessary to obtain warranty service and replacement.
SOURCE: I get a black vertical line when I make copies on
probably this is due to dust. clean the lens of scanner of your printer. if it would not work, change the scanner cable, it will sure work.
Creating Customers For Life
SOURCE: Printhead error, have cleaned it,
Lexmark recognizes that some of our inkjet all-in-one customers
may be experiencing issues with their print quality. We take our customer user
experience very seriously, and we strive to ensure that each time a customer
prints using a Lexmark device the page is crisp, clear and up to the highest
standards. However, if your device is displaying a 'printhead error' on the
hardware and/or you are suddenly experiencing a print quality issue, please
contact the Lexmark Technical Support Center at 1-800-539-6275 or point your
browser to http://bit.ly/lFKDzs for
online technical assistance. Lexmark agents are prepared and able to help diagnose and
resolve your issue. This may involve updating your printer firmware and/or
replacing the printhead for your printer, at no charge to you, our
customer. Installation is quick and easy for any customer to
perform.
345 views
Usually answered in minutes!
×