Sharp AR5516 photocopier error F2
Toner type error
Pls it is 5516 toner replaced, developer replaced, yet it does not add toner it is fant by the side of the copy and eventually the paper all become fanty. what is the problem or what can i do
THIS IS DEVLOPER PROBLEM CHANGE DEVLOPER TAHN COPIER O K
Write your answer...E7-16 error code in 5516
F2-04 error code sharp ar 5516
SOURCE: AR 5516S SHARP COPIER IS SHOWING F2 4O FAULT CODE
toner type error
replace the toner cartridge
SOURCE: my sharp AR 5516 shows
You have to change your developer, you can see developer spillage inside the machine it is a common problem in this particular model. Rate this and vote for this after your problem resolved.
SOURCE: error code Sharp AR-M 257
The F2-04 error code you are getting is that you are using the wrong toner.It may be form sharp,but it toner chips is different.Only the chips swapping at the toner back can help you.
SOURCE: AR 5516S SHARP COPIER IS SHOWING F2 4O FAULT CODE
During installation , use sharp ar205 developer and sharp ar021 toner cartridge. This shows you did not use developer or used the wrong ones, good luck.
13,773 views
Usually answered in minutes!
#-int-c-int-14 ok
ami #-int-c-int-14 ok korachi kintu thik hoyni...ki korbo akhon please help me.
ami # INT C INT, then 25-(start), then 02 (start) korachi kintu thik hoyni...ki korbo akhon please help me.
Replace developer
I have done but not work
×