Eclipse CD2000 has no sound from a cd or sirius... radio works

These units do not have a security code like some radios. Instead, they are coded using a CD. You insert a CD into the radio and it codes to that disc. You need that same CD if you ever want to unlock the player. If you don't have it, you are SOL. Eclipse is no longer in business and they were the only ones that could reset it. The system is known as "ESN Security".

ESN Security: This unit is equipped with the Eclipse Security Network. You can register a particular music CD as a "key" device which unlocks the security. If the registered CD is not detected, the navigation and audio functions will be disabled when the main unit is disconnected from and reconnected to the vehicle's battery.

The wiring diagrams are in this installation manual.

The SID # you need to activate that is displayed in two places. On the unit itself, and on channel 0. Try switching to channel 0 once in Sirius mode, and the SID # should be displayed.

Try the following website for the instruction on how to set the clock radio.
http://www.eclipse-web.com/us/manuals/manuals.html

by "play" im assuming u mean no audio... check the wires, in the back there should be 2 blue wires, one has a white stripe... splice them together or reverse them... it sounds like you have it hooked up to the power antenna wire (should be solid blue wire) is sending power for the amp to turn on only when the fm is playing... you want the amp turn on wire (blue with a white stripe) to be hooked to that factory wires so when the radio is on your factory amp is triggered... if that doesn't work let me know there are other thing you can try...

are you running separate amps for the woofer and speakers??? sounds like you have the woofer amp being turned on be the amp remote wire (blue/white) and the speaker amp turned on with the power antenna remote wire (blue). if this is the case you need to use the blue/white to turn both amps on.

No, the RCA jacks on the back of a CD2000 are line-out, not inputs.

all you will need is the eclipse ecl- sc1 module and a subscription and you will be off and running with this deck

does it have a reset button or switch.. usually found on the underside of the face plate

throw it in the trash no good cant reverse