Turn the sound off for recording on PV-GS320 DV camcorder

http://www2.panasonic.com/consumer-electronics/support/Cameras-Camcorders/Camcorders/MiniDV-Camcorders/Drivers-Downloads/model.PV-GS320.D#ts try this link. there are a few downloads there that might be what you are looking for.

Sounds like dirty heads .
If the lines are recorded onto the tape, probaly not.
Try a head cleaning tape in the camera or use another playback device.
If the lines are recorded onto the tape then track down someone with a TBC (timebase corrector) and pipe the signal through that and record to another tape.

Most laptops use a four pin cable as does the camera.
You do have a 4 to 4 pin cable?

Open Windows Movie Maker with the camera attached and turned on in playback mode.
File> Capture from Digital Camera.

The driver you will need to download to the PC then execute to make it work is at the link here ok.
Bye
David
Lowestoft
http://www2.panasonic.com/consumer-electronics/support/Cameras-Camcorders/Camcorders/MiniDV-Camcorders/Drivers-Downloads/model.PV-GS320.D#ts

Download your XP driver from
http://www2.panasonic.com/consumer-electronics/support/Cameras-Camcorders/Camcorders/MiniDV-Camcorders/Drivers-Downloads/model.PV-GS320.D
Please rate this solution. Thanks.

Hi,
You can download the operating instructions from the following link:
Panasonic PV-GS320 Camcorder
http://service.us.panasonic.com/OPERMANPDF/PVGS320-MUL.PDF
Hope it helps

hi,because final cut express only support .dv,mpeg-4 and .mov formats.
so you can convert your video files to .mp4.
you can use the third party software convert your video files to .mp4 format.
you can use Mod to Final Cut Express Converter.
http://www.fceconverter.com/mod-to-final-cut-express/

You can't. SD card is only to take images in this camera.

Hi,
Do you put a tape in when you try to record or do you connect to a DVD / VCR so that it records onto the DVD or VHS?
If this is how you do it, then I will recommend you use a mini DV tape instead.
Hope this helps.
Osei71

connect a lead via your tv video out audio out jacks. Select tha appropriate channel (You may have to go through the av channel on you tv and tune in the channel you want to record) or, video or dvd player audio out video out jacks. connect other end to your camcorder. Select on the camcorder menu video in audio in. Turn on tv. If connected to video or dvd player, press play. Press record on your camera. When finished recording press stop. Presuming the camcorder is tape, you can buy a tape adaptor to play or record your mini tapes in a standard video recorder, then take them out of the adaptor and play them back on your camcorder. You can also do all this via a computer. Also if the camcorder is disk or hard drive it can be used the same way as a regular dvd recorder to record tv programmes once connected to you t.v. Let me know how you go 26 red