KDL46EX500 has 6 flashing red lights. Any suggestions?

How many times red light flashing?
This is an error code and red flashing count indicates a particular problem in specific section of tv, please count how many times red light flashing after 3 seconds long pause and post here to suggest a solution.
Thanks.

Hi,

if the Lamp error and Temperature error lights are flashing red this means that there are two separate errors.

• A flashing lamp light means the lamp failed to ignite. It could be a lamp driver problem or lamp failure. Replace the lamp to resolve the issue. If the issue is not resolved, then service the projector.
• A flashing Temperature light signals a fan error. Turn the projector off and allow it to cool down. If the light is still flashing after the projector is turned back on, service the projector.

Goodluck..

I would suggest contacting the Bowers & Wilkins customer service department - [email protected] - they will help you fast!

upon hitting the power button, the red light showing on the front of the tv should flash a couple of times, the screen should come on and the light goes off..the red "stand by " light stays on and we cannot get the screen to come up..needless to say, cannot get to the menu to change any display options...any suggestions?

i have same camera.. but i dont think this is a problem.. while charging light keep flash.. when it completes charging it shows u solid red light..

This means Battery is low to charge the capacitor.
I suggest you test this with unused new Duracell.

The 3 flashing lights suggests that it's a hardware problem and you'll have to send your 360 to Microsoft for repair. Go on xbox.com and there is a link for repairs.

Hi, I sent my camera to the dealer...thanks anyway, Sevendata

if you could send the serial number it will help me determine who manufactured it for sears and then point you in the right dirrection.

make sure the doors are shut all the way! there is a little button there.