What's your prCode needed for maxim LM-VB01 universal jumbo remote control to connect to a vizioTV . Thankyouoblem?

Jumbo Universal Remote Control
Danny, Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Innovage Jumbo Universal Remote
http://www.jumboremotecontrol.com/innovage_jumbo_remote_manual.PDF
How To Program The Innovage Jumbo Universal Remote Control
JUMBO Universal Remote Codes Codes For Universal Remotes

Universal Remote Control Universal Remote lm-1079 Need ...

tv.manualsonline.com/...remote-control/...remote/need-codes-for-univers...

May 9, 2014 - Need codes for universal remote model number lm-1079. Asked by paula young on ... 1 how to set code for tv from lm_1079. Was this answer ...Missing: broksonic

Universal Remote Control Product Support ' ManualsOnline ...

tv.manualsonline.com/support/universal-remote-control/

Need codes for universal remote model number lm-10. Universal Remote ... UniversalRemote Control Universal Remote ECCO LCD 24?€? Tv. 0 Solutions ...

Universal Remote Control Codes - iWave Super-Sized

0038,0031,0033. Try these codes. If you wish to get more; check the site linked here. It has set-up code list & set-up procedure to many popular brand remote controls. See it in "Mosaic" view. It will make surf easier.
http://electrohelponline.blogspot.com/
Try this link too.
http://electro-medical.blogspot.com/

To which device do you want setup codes with Jumbo universal remote control? Brand name? If you wish to get setup code list to jumbo remote control, check this link.

Codes to check are: 0105 0077 0076 0109 0007 0009 0004 0005 0085 0172 0942 0358 0012 0015 0080 0104 0106

The instructions on letting the Hipi remote to seach for the code that came with my remote are not correct. I used the instructions from HOWTO.COM and printed below. There are two changes from the printed instructions. The first is to push the <TV> button after the <Code Search> button. The second is that the <Enter> button saved the code not the <MUTE> button.

Instructions
1
Turn on the Vizio TV.
2
Aim the Jumbo Universal Remote at the Vizio TV and hold down the "Code Search" button on the remove for roughly 3 to 5 seconds. The LED lights on the Jumbo Universal Remote will come on.
3
Press the "TV" button at the top of the Jumbo Universal Remote.
4
Start pressing the "ON/OFF" button repeatedly until the Vizio TV turns off. (This took only a few tries for my Vizio TV)
5
Press "Enter" on the remote immediately after the Vizio TV turns off to save the code.
6
Test the Jumbo Universal Remote by trying to control the Vizio TV with the remote. If the control doesn't work with the remote, repeat the entire process.

Hello
Setup codes for Sanyo TV with Innovage Jumbo remote control are:
004/013/049/108

OK.

A remote is not designed to control and Moitor. They only run by the video/sound output from the pc. So I am taking it for granted that you meant TV instead of Monitor.

A. Before buying a new remote try replacing the batteries first.

B. I found the Innovage Jumbo Remote Control manual and it has no code for the Vizio TV, you will need to utilize the remote's "Code Search" option.

C. Instructions

1. Turn on the Vizio TV.
2. Aim the Jumbo Universal Remote at the Vizio TV and hold down the "Code Search" button on the remove for roughly 3 to 5 seconds. The LED lights on the Jumbo Universal Remote will come on.
3. Press the "TV" button at the top of the Jumbo Universal Remote.
4. Start pressing the "ON/OFF" button repeatedly until the Vizio TV turns off. This will likely take several minutes due to the amount of available codes.
5. Press "Enter" on the remote immediately after the Vizio TV turns off to save the code.
6. Test the Jumbo Universal Remote by trying to control the Vizio TV with the remote. If the control doesn't work with the remote, repeat the entire process.

Good luck.

http://www.universal-remote.net/philipsmagnavox.html