Have a SAMSUNG HT-TZ212 home cinema kit. now when i power this on, it displays protect and then powers off
Protect mode will kicking whenever a fault is detected.
Causes that can start protect mode are:
Electrostatic harges on internal circuits.
Leave the unit unplugged for power for one hour or so, this will allow discharge.
Bad speaker wiring.
Check speaker wiring, try unplugging and plugging back, or start after removing one speaker at the time.
Internal fault.
Internal
fault is the natural cause for protect mode. If all the above did not
work, then the problem is a blown component or an internal fault. In
this case the unit must be taken apart , tested and repaired by an
experienced person.
If the unit is less than one year old, or if you
want to get service, call Sony at the phone number listed on the
product documentation.
Regards.
Try disconnecting all speakers and see if it still protects if it does it could be faulty cables or speaker
Overloads can be from excessive periods of high output and shorts would be wiring issues or a speaker blowing up.
You should be able to feel if it's hot. WHY is it overheating? Make sure it has sufficient ventilation on all sides and that vent holes are not blocked by dust balls. Ensure the fan (if equipped) is running as designed (some only operate on demand). Clean dust and debris from it.
If the amp comes back on after cooling, you're lucky. They only have so many self-protection cycles in their lives so continuously resetting or cycling their power without addressing the cause can do more harm than good.
If it protects immediately on a cool power up you should disconnect the speaker connections and try it 'naked'. If it comes up then diagnose which lead(s) are shorted. If it does not come up the problem is internal and should be left to an experienced hands-on tech.
4,559 views
Usually answered in minutes!
Exactly the same happened to my system(HTTZ212):(
Frorem
same here ....just played well and just on one they it says protect and shuts off, nothing helps ..what can i do about it
I am having exactly the same trouble with mine and it is not mentioned at all in the user manual - only had the system a couple of months and was working fine yesterday!! :-(
same problem has happened to my samsung httz212 ,wont turn on just displays protect and turns off
I have the same problem, samsung comes up protect, then powers down, dvd still inside, pressed all buttons, checked book and no english in book.
same as prior people, what can i do here, bin it or what
have a SAMSUNG HT-TZ212 home cinema kit. now when i power this on, it displays protect and then powers off
"SAMSUNG HT-TZ212 home cinema kit comes up with protect" problem
I have a Samsung Surround System HT-Z110, about 6 months old, now at startup it displays PROTECT and shuts down. What to do?
Does the samsung Home cinema system ht z11 have an aux function? If so where is the input point?
×