Frigidaire 24 in. FDB126RB Built-in Dishwasher Logo

Related Topics:

Amy Taylor Posted on Nov 19, 2006

Dishwasher not washing

I have frigidaire dishwasher and it will fill, heat and drain the water but the dishwasher will not wash the dishes...the sprayer doesn't spin around and spray water on the dishes...what should I do?

  • 3 more comments 
  • shaggy901 Apr 28, 2008

    the water isnot going from the pump to the top of the dishwasher

  • austec9 Jun 19, 2008

    I have dishlex global 300 series dishwashers which the wash motor does not
    work and the spray arms also will not spin at all how can I fixed this problem?


  • Anonymous Sep 16, 2008

    dishwasher will fill, heat,but the sprayer arm will not turn to spray water on the dishes

  • Anonymous Mar 12, 2014

    The dishwasher is about 20yrs old

  • Anonymous Mar 15, 2014

    whirlpool dishwasher won't spin to wash makes sound fills water up but does'nt wash but will drain whats up with that?

×

1 Answer

Diane

Level 1:

An expert who has achieved level 1.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Problem Solver:

An expert who has answered 5 questions.

  • Contributor 7 Answers
  • Posted on Nov 02, 2007
 Diane
Contributor
Level 1:

An expert who has achieved level 1.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Problem Solver:

An expert who has answered 5 questions.

Joined: Nov 02, 2007
Answers
7
Questions
0
Helped
31534
Points
23

By chance have you cleaned the spray arm out lately? There could be something blogging the water from getting into the arm. In most dishwashers, the arm only spins because water pressure makes it spin.


Miss Midget

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Ffbd2407lm frigidaire dishwasher stops washing cycle?

Sounds like you need a professional to diagnose the unit for repairs. You are either having a timer issue or a control board communication error.
3helpful
1answer

Kenmore elite dishwasher, does not get the dishes wet

sounds like wash motor is not going . it will fill and control thinks motor is working . then it will drain wash water / ( drain pump is a different motor ) and then refill and so on .. never washes but fills and drains and heats. ( look for leakage under the motor i'm sure you will find some ..
0helpful
1answer

Dish washer fills and then drians without washing

If you're sure it is heating the water, then it sounds like the wash motor/pump has failed. If you've worked on washing machines and/or dish washers before, this is potentialy a DIY job - the Haynes Dishwasher manual is very good, and parts can be found on the internet.

The reason for cheking it is actually heating the water is that the symptoms sound very similar to those of a failed heater = fill, pause, empty, stop usually accompanied wth an error code. Error code will be presented by a number of flashes of a lamp, or a number on a display panle depending whch machine you've got.
0helpful
1answer

Fills with water and drains will not run to wash dishes

The main water pump is not working. A repair will be pricey. it may be best to get a new dishwasher
Apr 21, 2009 • Dishwashers
0helpful
1answer

Dish washer won't wash

is the drain hose to low causing the dishwasher to fill and drain at the same time,if the water level is to low the motor wont wash the soap out of the dispenser.hope this helps
2helpful
3answers

Kenmore dishwasher 58715142400 fills but doesn't wash

Motor has gone out..just like mine...Make sure u have voltage going to the motor, (disconnect the plug from the motor) and use an electric meter to make sure you have voltage going to the motor. If so the motor has either gone out or has been blocked by something! If no noise except clicking then motor has gone out. Looking at about $150 for motor.
0helpful
1answer

Dishwasher Repair

Ebers, you have a seperate wash and drain motor on this model. When you remove the bottom panel the drain pump will be on the right and the circulation (wash) pump will be in the rear. You are going to have to verify that you have power getting to the wash motor. Sometimes this is difficult without removing the dishwasher. The motor may have a quick connect harness going to it that you can check voltage there. If you have voltage to the motor during the wash cycle and it's not running, well, there's the problem. If no voltage, then it's probably a timer issue. Catriver..post back
Not finding what you are looking for?

1,090 views

Ask a Question

Usually answered in minutes!

Top Frigidaire Dishwashers Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Brad Brown

Level 3 Expert

19187 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Frigidaire Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...