Put harness belt back on baby car seat

We would advise you contact the manufacturer of the carseat as the likelihood is that the unit will need to be sent to specialist engineers to inspect and put back together correctly. Due to safety implications of the harness being incorrectly fitted it may not be possible to do this yourself.

Hi,

Open the carseat harness and have the carseat in front of you so you\'re looking at the seat. Slide the shoulder harness pads down the length of the harness and off over the harness clips. Unzip the footmuff and place it into the seat and thread the harness through the holes at shoulder and crotch position. Replace the shoulder harness pads onto the harness. You can now place your baby in, do up the harness + tension correctly, then zip up the footmuff to keep baby cosy.

If you\'re still using the headhugger/lumbar support wedge this can be used underneath the footmuff.

Hi

Due to the safety implications of the carseat harness being incorrectly fitted if the harness has been completely removed from the carseat shell it would need to be sent to engineers for them to re-fit the harness. What country are you in we can direct you to the appropriate customer care team to arrange this.

Due to the safety implications of the harness being incorrectly fitted the harness should never be removed. To get the harness back in the carseat safely the carseat would need to come to the engineers for them to carry out this work. Please call the customer service department on 01284 413 141 Mon-Fri 8.30-4.30 to discuss.

Good Evening

What is the make and model of this carseat? Which country are you in?

HELP!!!!!!!!!!!!!!!! SAME PROBLEM, I CANNOT PUT IT BACK TOGETHER........

go on your products website type in make and model and an instruction manual will be available to read or download

my mom has an eddie bauer carseat for my daughter and washed it how do you put it back together

How to put car seat belt around infant car seat?

2 clips go in top center on back. one clip on each side by handle swivel points. also there is a string you thread underneath th front. Hope that helps