Program play prohibited

Always first unplug for a minute and make sure the discs are VERY CLEAN. Sometimes my player/recorders give an error message 2-3 times but eventually are able to load the disc.

Unfortunately, you have a DVD player that is "Region Specific" and cannot be changed. Your system has a region code printed on the back of the unit and will only play DVDs that are labeled with identical region codes. DVDs labeled "ALL" will also play in this unit. If you try to play any other DVD, the message " Playing this disc is prohibited by area limits." will appear on the TV screen. Depending on the DVD, no region code indication may be labeled even though playing is prohibited by area limits.

What you are describing is a bad/damaged optical unit in the player--some are sold but only as a complete unit.

NO. it will most likely be either a limitation of the player or a faulty/incompatible disc.
A very quick test is to play the disc in another slot and see if the problem moves with the Disc.

Try cleaning the glass laser eye lens with rubbing alcohol and a cotton swab. If cleaning doesn't work, you may want to change or laser eyee unit.

clean the laser lens first

i am ohamed scondo
i have pdf repair

it would help to know what machine your playing these in . your media seems to be have recorded inna different format maybe your discs are not burned properly maybe theres a fault in your machine i would take it back to the shop or the media back the shop oh and if burning you must not use ne other program its probably your using media that is not finalized or your machine isnt designed to play them discs your using

Have you tryed to use a lens cleaning disc yet. The laser lens on these players and recorders alike, must have the lens cleaned every oince in awhile. If that does not help, most likly you have a bad laser pickup assembly and you will need to replace the plaer as to have that repaiered, you could buy a new unit. Good Luck

3 out of 10 will record 30-40 min and say DISK FULL..
2+ out of 10 I'll record 2- 1 hour shows then I'll
get a " disc unknown " error...
www.govideo.com site NOR [email protected] works..
did they go out of business ?
who bought them ? where's the support ?
[email protected]