Can not install Gigaware usb multimedia keyboard

1st You download Webcam Driver.
Gigaware usb keyboard 26-460 drivers
After this install the Webcam driver in the system.
Installation of Webcam Driver
Go to the control panel
Click on the System Icon
Click on the Hardware Tab
Click on the Device Manager s
Select the Unknown Device or printer device where yellow Question Marks sign on it.
Right click on it and uninstall it.
After this go to the top of the device manager and click on scan for hardware changes.
Driver installation Wizard start.
Brows Your Driver from the Hard Disk and click on next.
Driver will be install.

It sounds like your operating system has failed. Your best bet would be to use a working computer to burn a new install disc / backup disc / repair disc and then reinstall your operating system, or if possible repair it.
Have you tried plugging the VGA output into an external monitor and turning it on? Maybe your screen has just failed, if it does output to an external monitor.
You can get it into external mode if you boot it up with an external monitor connected, a USB mouse connected, and a USB keyboard. Boot up the machine (plugged in!) and close the lid right away, and it should automatically kick over. If not, try windows key and P at the same time, once the machine is "running"

1. Install the driver first with the keyboard usb cable disconnected
2. Then attach the keyboard to complete the installation

think this might be a driver issue check for an update for your system

Check and install drivers for your multimedia keyboard which is came along with the Keyboard. Also check whether the USB drivers has been installed properly and check the status of the same.

Revert back for more assistance. Also give your valuabale feedback/rating on the same.

Remove the CD, then go to the program files folder and remove the folder that applies to this device. Remove the device from the USB port.

Reboot the PC.

Reinstall the software before you attach the webcam to your PC. Only attach the device when directed by the installation program, or after you have fully installed the software.

It's a pain in the ****, but reboot after you finish installing the software and then attach the device. This will allow the device manager utility to fully recognize the device and apply the appropriate drive files.

Rich

Install your Operating system

When entering standby, the usb ports go to sleep. Most motherboards allow you to tell the bios that you are using a usb keyboard. That should solve the problem. I keep an old ps2 keyboard plugged in and on the floor as a 'just in case'.

No need for disc, don't worry.
Radio Shack/Gigaware 26-949 USB to Serial Cable drivers (32/64bit) can be found at driverupdate us
I hope I have helped you...
Take a look, and enjoy

what are you connecting? Name of the device, manufacturer....what is your operating system XP?
answer those and then we can see if we can help you.

Have you tried other USB ports? Other computers? was there software that came with it? did you attempt to load it?