Speed Queen doesn't agitate.

check belt if ok check cogs under agitator

https://www.pwslaundry.com/c-295313-commercial-speed-queen-awn412sp111tw01-top-load-washer-parts-for-repair-service.html?msclkid=e3bfa3c0ea10105c5fb3fe38f5e42190&utm_source=bing&utm_medium=cpc&utm_campaign=CPCS_DSA&utm_term=pwslaundry&utm_content=All%20Website

Is the drive belt in good condition?
Does the machine spin dry?
Is there water leaking from the bottom?
I suggest the gearbox needs to be replaced. Another sign is if the machine is noisy when it is washing (agitating)

Hello,
To remove the agitator all that ya need to do is grab the bottom edges of it and pull it straight up and out..if locked onto a hub under it and is just held to that hub by several tabs

Gene

you need to see if the motor turns one direction during wash and the other during the spin. If so, your gearbox is faulty and needs replacement. If motor only goes in one direction at all times, then very possible, the timer is faulty.

Is the belt broke?

If not, will it spin it you put it in spin mode?

If it spins, but not agitates, the transmission is locked up in agitation and needs replaced. This is a major undertaking.

the washer transmission has failed.

Hi, just fixed the daughters speed queen, same problem. The three brake shoes were worn allowing the tub to spin with the agitator.
replaced the shoes, washer fine. At first I thought it was the top ring. spent 30 dollars for nothing.
good luck

You should be able to get a replacement agitator from partselect.com or repairclinic.com. look on line for an agitator however How old is the washer, would you give me the serial number.

T