At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
These are the Dell part numbers for the PowerEdge 1600 SC heatsink:
7R181 Heatsink Assembly (Includes heatsink and fan)
83MGJ Heatsink Clip (2 required)
Dell spare parts can be reached by phone at 1-800-357-3355
Had the same thing happen to me today and in my case it was a code 18 as they come... It started while I was installing a video card adapter for a dual monitor setup. The solution - I had to simply close the side panel I had left open for testing and then reboot the server. The intrusion alarm went off.
Hello
This error mostly comes with the failure of processor fan, overheating of processor shuts down the system due to processor's protection. You need to check the fans and replacement is recommended.
Hope this helps
this error is basically telling you that fan 2 is either dead or not spinning at the correct RPM's which means it needs to be replaced. Usually there is a diagram inside the cover that will tell you which fan is fan # 2
ERROR 02A2: BMC System Error Log (SEL) Full press F1 to continue or F10 to enter BIOS. I wait for 2 minutes without doing any thing my server get started normally. Please help me how to stop this error
×