Sony Playstation 3 (PS3) Console Logo
Posted on Nov 07, 2008

Cant get hdmi for ps3 to work on my jvc hd 52g887

Hooked up hdmi cord for ps3 cant seem to get anything to 52"jvc hd 52g887

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

  • Contributor 1 Answer
  • Posted on Nov 07, 2008
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Joined: Nov 07, 2008
Answers
1
Questions
0
Helped
688
Points
2

Had same problem with Panasonic PT60LC14 tv when connecting by HDMI cord to my PS3 and a blue ray disc was playing. First, read your tv manual to see what video inputs it supports . Then read the PS3 online manual (section on "video output settings").

For me I found out that my tv only supported 1080i (along with 480i/p, 780p) and the ps3 manual says blue ray outputs 1080p, so my blue ray discs will not play on my tv according to the PS3 manual. PS3 manual says to restart the ps3 (power off, then power on and HOLD for 5 seconds) - then the standard video output settings should be reset. Hopefully the ps3 menu will pop up at least. I haven't tried this yet but if it doesn't work, i'll may try to reset PS3 video out settings manually first using another tv that works with it ..

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I can't connect any sort of HDMI enabled device to my JVC HD-52G887 television. Does anyone know how to fix this?

Check to confirm that you are using the correct input source for where it is plugged in. ie HDMI 1 HDMI 2

If that doesn't work check that the cable is good and is seated properly on both ends.
0helpful
2answers

Can't get picture after hooking ps3 up to jbc hd-56g647 by HDMI cord

If it works on another TV, make sure the correct HDMI port is connected.
1helpful
1answer

Is the JVC model HD-52G787 or HD-52G887 able to receive digital siginals without the use of converter box?

It doesn't look like it.
Have a look;
http://www.retrevo.com/pdf/391dj496/4/Quick+Setup#q=JVC+HD-52G887

Hope that helps.
0helpful
1answer

I bought a hdmi cord so my son can play ps3 we

Hi:
Check the video connector on the PS3 for a switch to switch from composit video to HD video.
9helpful
2answers

HDMI broken on JVC HD-56G786 TV

have you ever went thru your hdmi setup procedure that jvc recommends?
0helpful
1answer

My jvc tv model# HD-52G887

You need to replace the power supply board. The new ones have a bigger heat sink - obviously JVC knows about the problem because they made the new ones bigger. It cost $250 from JVC and I installed it myself - took about 3 hours to do. If you are not tech savvy call a repairman. Hope this helps.
0helpful
1answer

My 52' HD television will not turn on, it is a JVC HD-52G887. The blue light comes on but there is no blinking red light. Please help

unplug the tv, then reinstall the bulb,if that doesnt work youll need a tech to help. (dont buy another jvc tv)
1helpful
2answers

JVC LT-32DS75SJ issue with HDMI

Try this

1. Turn ON TV
2. Connect PS3 to TV HDMI input
3. select TV HDMI input for PS3
4. turn OFF PS3 if it is ON
5. Press and hold the [I/O]Power button until the PS3 until you get the "HDMI Detected" message.

Also, this TV has a circuit that deactivates the HDMI if the rear cover is removed. It is possible the HDMI may have been turned OFF. This is reset in the service menu of the TV.
0helpful
1answer

Hd-52g887

How do you know the bulb is fine? Are the LEDs blinking together or alternating?
Not finding what you are looking for?

698 views

Ask a Question

Usually answered in minutes!

Top Sony Video Game Consoles & Games Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Jose Ramirez

Level 2 Expert

264 Answers

Alexander

Level 2 Expert

171 Answers

Are you a Sony Video Game Console and Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...