Motherboard M925 I need the manual for the M925, where can I find it? If anybody has it, please, send it to [email protected] Thanks.

Hello download the manual here:

http://www.pcchips.com.tw/PCCWebSite/Products/ProductsDetail.aspx?detailid=231&CategoryID=1&DetailName=Manual&MenuID=45&LanID=0

You willl need adobe reader to read content.

Enter the bios (press the delete button under post) and select the boot option for the drive.

The bios must be set to boot from cd/dvd first.
Read the manual how to do this.
And second the harddrive.
Remember to save your work when done.

Good luck

Try this
http://www.pcchips.com.tw/PCCWebSite/Downloads/ProductsDetail_Download.aspx?detailid=141&DetailName=Manual&DetailDesc=M925(V1.1a)&CategoryID=1&MenuID=39&LanID=0

or

http://www.pcchips.com.tw/PCCWebSite/Downloads/ProductsDetail_Download.aspx?detailid=86&DetailName=Manual&DetailDesc=&CategoryID=1&MenuID=6&LanID=0

I was able to find a website that has the specifications for this board, hope that will help you.
Click here.

Please rate this solution by clicking the thumbs up at the top right of this solution. Your rating is much appreciated.
Thanks.

Hi Jenkins21448,

I believe your mean PCChips M925. ECS didn't make a M925 board.
So you can find the PCChips bios and drivers HERE. If you download the manual there is a drawing of the motherboard for you to compare, to make sure you have the right drivers. But, you may be right that that board you have is extremely rare. I've never seen or heard of ECS making a M925. Check out the picture to be sure.

Thanks

Mark

PC2100 or a.k.a. 266

Now if you checked both solenoids ant you know the valve opens to send water to ice tray then we need to consider several other factors. Thermostat heating element under the ice tray, limit switch inside gearbox, blown fuse in the wiring harness between ice maker and plug receptacle. Now I am willing to walk you through this and we may find the problem right off. I have a diagram of the ice maker and I will send you all the repair parts or manuals you need. My e-mail is
[email protected] email me and I will send your manuals PDF format. Or visit my site’s we offer free help and any answers you may need, Here is my sites. Thanks, Sea Breeze

Now if you checked both solenoids ant you know the valve opens to send water to ice tray then we need to consider several other factors. Thermostat heating element under the ice tray, limit switch inside gearbox, blown fuse in the wiring harness between ice maker and plug receptacle. Now I am willing to walk you through this and we may find the problem right off. I have a diagram of the ice maker and I will send you all the repair parts or manuals you need. My e-mail is
[email protected] email me and I will send your manuals PDF format. Or visit my site’s we offer free help and any answers you may need, Here is my sites. Thanks, Sea Breeze

http://servicepartstec.blogspot.com/

http://appliancepartsse.blogspot.com/



http://appliancepartsse.blogspot.com/

If you look at this picture, the pins on the motherboard should be on the far left below the brown slot and above the white connector. The pins on the board are marked with tiny white letters HDD, PWR, RST, SPKR. The USB connection on the board may require a separate header, I can't find a manual to see for sure.

www.pcchips.com

Hi,

look et...According to the numbers you provided you have Elitegroup Computer motherboard. So for any possible BIOS upgrade, drivers or any other technical support you will need to visit => www.ecsusa.com. or call them at 510-226-7333. Suc6 Theo.nl

you can connect it using manual 0f the mother board.
if you dont have the manual then download it from the product manufacturer site.