My cell is not switch to on - Nokia N73 Cellular Phone

On a cell phone it is to extend battery life when the phone is not required. Some phones will still retain some functions eg alarm clock, even when off. You don't need to turn the phone off when charging, but it will charge up faster if you do.

1) Copy following link for wiring photo cell:
http://waterheatertimer.org/How-to-install-and-troubleshoot-photo-eye.html

2) Copy following link for several timer wiring diagrams.
The photo cell is basically a switch, and the timer is also a switch.
2 switches can override each other if both switches are 3-way.
However a photocell is not a 3-way switch, and most timers are not 3-way timers.
http://waterheatertimer.org/Timer-with-remote-control.html#switch

3) If you connect a timer to a NO-NC relay, and also connect photo cell to NO-NC relay, then both timer and photo cell become 3-way switches. Except with a limitation. Neither switch can turn the load OFF when the other switch is ON.

4) Add a comment Feb 2013
What timer do you have?
What voltage?
What load is controlled by timer?

If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

If your cell phone is in a pouch with a magnetic catch then the magnet could switch off your cell phone. This has happened to my Nokia.
The other thing that can switch off your cell phone is dirty battery contacts and dirty battery contacts in the cell phone. Vibrations will cause the battery to disconnect. Clean the battery contacts and the cell phone battery contacts with methylated spirits.

Hello Mayur,

Switch off the Nokia 1209 Cell Phone. Remove the battery for 30 minutes. Reinsert the battery and switch on the Nokia 1209 Cell Phone. Enter the default code 12345 or 00000.Your Nokia 1209 Cell Phone will be unlocked.

hi


i think you need to consult an exper on this ,we have lot of expert in fixya please contact them andget your answer in min thank u

try boosting the battery.. i think u hav a neew cell so u hav warranty??

Sounds like a "homework" question to me.
Tell your teacher that I am doing your homework for you.

If each cell is 4.3 mbits, then each cell takes 10 seconds to go "through" each switch. So, on the average, one must wait 5 seconds
(given a minimum of 0 and a maximum of 10) for the switch to complete sending an "active" cell. Then, actually transmitting one cell will take 4.3/43 seconds, i.e., 10 cells per second.

So, having 5 switches means 4 (or is it 5?) delays, i.e., 4 (or 5) times (10 seconds plus 0.1 seconds) resulting in a maximum of about one minute.

QED

My nokia 3110c is not switching on. while switching on its blinking for 3 times and with white flashes and not working.what i have to do?
can i update my cell without going to switching on?
please give the quick solution please

switch jabra off. switch cell on. turn bluetooth on. press "right hand" button next to middle button on cell to search for bluetooth devices. Hold down on switch and volume up switch TOGETHER on jabra. The cell then finds the jabra. I couldn't do this before I found Marie's problem below. Thanks for the info Marie!

you cnt do it with yourself,the best thing dat you can do is to refrogram your cell to the cellphone repair nearest in you.