Setting the bass on a kenwood cd player - Kenwood eXcelon KDC-X679 CD Player

In standby mode press and hold bass boost/menu button to open options menu. use direction pad to toggle thru options. push center button in middle of direction pad to enter each option for adjustments clock adj, etc...

Alright, the MP335 doesn't actually have a "loud" option, It does have Bass Boost settings, which you control by the B.BOOST button on the bottom row of buttons. If I remember correctly there should be 3 settings of bass boost. I hope this helped.

go to standby mode. then hold your bass boost button in and the menu should pop up. scroll through until you find th aux setting and use your volume control to set it to on. then the option should be back.

Make sure that the source is set to "Standby" when trying to access the menu. It took me about an hour to figure it out and afterward I felt like a ******.

http://inform3.kenwoodusa.com/manuals/kdcx492.pdf

Your manual direct PDF.

AM, FM

And Left and Right Track Select

Alright, the MP335 doesn't actually have a "loud" option, It does have Bass Boost settings, which you control by the B.BOOST button on the botttom row of buttons. If I remember correctly there should be 3 settings of bass boost. I hope this helped.
-Andrew Hawkins

check that you do no have the speakers wired with polarities crossed over. "out of phase" this will have the effect of cancelling out the bass. I try to rememebr stripe is negative

Sounds like a wiring problem.

There is a YELLOW wire that should be connected to a constant +12 volt supply when the vehicle is off. This retains the settings.

Check the connections and see if thats the problem.



Please RATE my solution at the bottom.

Best of Luck.

Here ya go;