Kenmore E-Lite HE3

Hello Debbie;

My name is Peter. I am a retired field service appliance technician.

1.) It sounds like you have a bad door latch. These are easily replaced. With a small flat head screw driver just wedge them out.


Cost: $7.00

2.) You may also have a broken door switch. Push in on the white button to make sure it goes in. Check the contactor on the door to make sure it is not bent.

Cost: $24.00.

3.) Also, check your door seal to ensure it is not coming off from wear.

Part number 3390733 Cost: $41.00

sounds like the bearings need replaced, when replacing bearings you need to replace all of them to ensure proper function and life longevity.

It appears your timer/main controller/CCU has failed in this instance.

For replacement parts - head on over to PartSelect.com or RepairClinic.com and enter in your full model number for a full parts listing.
I recommend both sites because ...


FixYa has no affiliation with either site - I have been using and recommending them for years - trouble free.

PartSelect has a great schematic database for locating the part on your unit and great "testimonials" for each part that often times includes HOW-TO information.
RepairClinic has pictures of each part they sell and also a great how-to and troubleshooting for basic repairs.


If your unit has never been serviced - there should still be an original service manual enclosed in plastic taped to the inside of the shell.
In the service manual are Error codes, maintenance procedures, and troubleshooting steps you can follow.


Anything too complicated or beyond your scope should be handled by a professional.

If you think you want to tackle the repair - and have gotten stuck on a step - reply to your question and I will be glad to help you out.




Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

find the metal sensors in the drum
scratchem up with sand paper

especially if you wash rugs, sneakers , or anything with acyrlic

It appears your felt drum seal adhesive has failed in this instance.

For replacement parts - head on over to PartSelect.com or RepairClinic.com and enter in your full model number for a full parts listing.
I recommend both sites because ...


FixYa has no affiliation with either site - I have been using and recommending them for years - trouble free.

PartSelect has a great schematic database for locating the part on your unit and great "testimonials" for each part that often times includes HOW-TO information.
RepairClinic has pictures of each part they sell and also a great how-to and troubleshooting for basic repairs.


If your unit has never been serviced - there should still be an original service manual enclosed in plastic taped to the inside of the shell.
In the service manual are Error codes, maintenance procedures, and troubleshooting steps you can follow.


Anything too complicated or beyond your scope should be handled by a professional.

If you think you want to tackle the repair - and have gotten stuck on a step - reply to your question and I will be glad to help you out.




Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Hi, how are ya?

The E1 is a thermistor problem. It's a little black fuse that's next to the thermal fuse on the duct housing.

It's pretty easy to fix. You need to take the bottom pannel off and then the black blower housing.

Good luck :)

You need to clean vent hose and vent line in wall of house.

it sounds like a clog in vent.if yours vents up thru roof you may need to have a chimney sweep come out and sweep vent.check and make sure the vent hose is net kinked or full of lint.

Yes. Remove the kickplate and check the continuity of the thermal fuse located on the blower housing.

there around 300.00 1 ideal to share buy service smart agreement from sears all parts &labor will be covered up to 500.00 i have warranty it payed off big time