5 digit Remote Code for Centrex TV

Dear all
I got split centrex air conditioning model CTAR60GW l lost remote. I have new one but I haven’t code number please send me code thank you so much

you can buy the sony universal remote that will surely work with your tv.

Hello
Proceedings to programme Jensen remote with TV follows.
[1] Manualy turn on the device you want to programme.
[2] Find three digit code for that device which you want to programme.
[3] Hold the device key down until the green indicator linght come ON.
[4] Release the device key. Within 30 seconds enter the three digit code number of your device.The light will flash when the right code has been entered.
[5] Press the Power Key. If the component turns off, you have entered the right code.
OK.

Hello
Centrex is not listed with URC04110 universal remote coldes. But you can search and find the code for your device with this remote control. I'm not sure will it work with your old Centrex TV. Anyway try. Wish you the best.

SEARCHING FOR YOUR CODE

If your device does not respond to the remote control after trying all

codes listed for your brand, or if your brand is not listed at all, try

searching for your code. For example, to search for a code for your TV:

1. On the remote control, press TV once.

2. Press and hold SET until the LED blinks twice, then release

SET.

3. Enter 9 - 9 - 1.The LED will blink twice.

4. Aim the remote control at the TV and slowly alternate

between pressing POWER and TV. Stop when the TV turns

off.

NOTE: In the search mode, the remote control will send IR codes

from its library to the selected device, starting with the most popular

code first.

5. To lock in the code, press and hold SET until the LED blinks

twice, then release SET.

6. To search for the codes of your other devices, repeat steps 1 through

5, but substitute the appropriate device key for the device you are

searching for.

CHECKING THE CODES

If you have set up the remote control using the Searching For Your Code

procedure, youmay need to find out which four-digit code is operating

your equipment:

For example, to find out which code is operating your TV:

1. On the remote control, press TV once.

2. Press and hold SET until the LED blinks twice, then release

SET.

3. Enter 9 - 9 - 0.The LED will blink twice.

4. To view the code for the first digit, press 1 once.Wait 3 seconds,

count the LED blinks (e.g., 3 blinks = 3) and write down the number.

NOTE: If a code digit is "0", the LED will not blink.

5. Repeat step 4 threemore times for remaining digits.Use 2 for the

second digit, 3 for the third digit, and 4 for the fourth digit.

6. To check for codes of other devices, repeat steps 1 through 5, but
substitute the appropriate device key for each device you are checking.
OK.

Hi,
Try the below website.If you can fine your tv from list you can programme it.Try using the auto programme.
HI,

Direct Code Entry:

Find the code your device.

1. Press and hold "CODE SEARCH".

2. Press and release the TV, VCR or Cable button. If programming an AUX position, press and release AUX first and then press the device type to be programmed.

3. Enter the 3-digit code number.

4. Release "CODE SEARCH".

5. With the device on, press another button to test (volume control/power button).If it does not work, repeat steps 1 to 5 with other codes which you have.

follow the below steps to set remote without codes

Code Search:

1. Turn on the device you wish to control.

2. Press and hold "CODE SEARCH".

3. Press and release the TV, VCR or Cable button. If programming an AUX position, press and release AUX first and then press the device type to be programmed.

4. Release "CODE SEARCH".

5. Press ON/OFF repeatedly until the device turns off.

6. When the device shuts off press and release ENTER.

7. Try using the remote. If it does not function repeat steps 1 through 6


To Get The Code Please Go To Below Website:

http://www.rcaaccessories.com/remotefinder/

You need to select the following information from the drop down list

1.Model of the remote
2.Type of device to which you want to program(TV/DVD/VCR)

Thank you

HI,

Direct Code Entry:

Find the code your device.

1. Press and hold "CODE SEARCH".

2. Press and release the TV, VCR or Cable button. If programming an AUX position, press and release AUX first and then press the device type to be programmed.

3. Enter the 3-digit code number.

4. Release "CODE SEARCH".

5. With the device on, press another button to test (volume control/power button).If it does not work, repeat steps 1 to 5 with other codes which you have.

follow the below steps to set remote without codes

Code Search:

1. Turn on the device you wish to control.

2. Press and hold "CODE SEARCH".

3. Press and release the TV, VCR or Cable button. If programming an AUX position, press and release AUX first and then press the device type to be programmed.

4. Release "CODE SEARCH".

5. Press ON/OFF repeatedly until the device turns off.

6. When the device shuts off press and release ENTER.

7. Try using the remote. If it does not function repeat steps 1 through 6


To Get The Code Please Go To Below Website:

http://www.rcaaccessories.com/remotefinder/

You need to select the following information from the drop down list

1.Model of the remote
2.Type of device to which you want to program(TV/DVD/VCR)

Thank you

Hi,

As we dont know the TV make you can use code search method.
It basically searchs the codes automatically.

follow the below steps to set remote without codes

Code Search:

1. Turn on the device you wish to control.

2. Press and hold "CODE SEARCH".

3. Press and release the TV, VCR or Cable button. If programming an AUX position, press and release AUX first and then press the device type to be programmed.

4. Release "CODE SEARCH".

5. Press ON/OFF repeatedly until the device turns off.

6. When the device shuts off press and release ENTER.

7. Try using the remote. If it does not function repeat steps 1 through 6


To Get The Code Please Go To Below Website:

http://www.rcaaccessories.com/remotefinder/

You need to select the following information from the drop down list

1.Model of the remote
2.Type of device to which you want to program(TV/DVD/VCR)

If you can find the codes for your /tv please follow the below steps

Direct Code Entry:

Find the code your device.

1. Press and hold "CODE SEARCH".

2. Press and release the TV, VCR or Cable button. If programming an AUX position, press and release AUX first and then press the device type to be programmed.

3. Enter the 3-digit code number.

4. Release "CODE SEARCH".

5. With the device on, press another button to test (volume control/power button).If it does not work, repeat steps 1 to 5 with other codes which you have.

Thank you

Hi,

Please follow the below steps to set up your programme
Direct Code Entry:

1. Find the code your device.
2. Press and hold "CODE SEARCH".
3. Press and release the TV, VCR or Cable button. If programming an AUX position, press and release AUX first and then press the device type to be programmed.
4. Enter the 3-digit code number.
5. Release "CODE SEARCH".
6. With the device on, press another button to test. If it does not work, repeat steps 1 thorugh 5.

Code Search:

1. Turn on the device you wish to control.
2. Press and hold "CODE SEARCH".
3. Press and release the TV, VCR or Cable button. If programming an AUX position, press and release AUX first and then press the device type to be programmed.
4. Release "CODE SEARCH".
5. Press ON/OFF repeatedly until the device turns off. You may have to do this up to 100 times.
6. When the device shuts off press and release ENTER.
7. Try using the remote. If it does not function repeat steps 1 through 6.

To get the code please go to below website

Please
Provide model of your remote
device to be programmed(VCR,TV)
Make name(toshiba,sony)

Thanx

Hi,

Please follow the below steps to set up your programme
Direct Code Entry:

1. Find the code your device.
2. Press and hold "CODE SEARCH".
3. Press and release the TV, VCR or Cable button. If programming an AUX position, press and release AUX first and then press the device type to be programmed.
4. Enter the 3-digit code number.
5. Release "CODE SEARCH".
6. With the device on, press another button to test. If it does not work, repeat steps 1 thorugh 5.

Code Search:

1. Turn on the device you wish to control.
2. Press and hold "CODE SEARCH".
3. Press and release the TV, VCR or Cable button. If programming an AUX position, press and release AUX first and then press the device type to be programmed.
4. Release "CODE SEARCH".
5. Press ON/OFF repeatedly until the device turns off. You may have to do this up to 100 times.
6. When the device shuts off press and release ENTER.
7. Try using the remote. If it does not function repeat steps 1 through 6.

To get the code please go to below website

Please
Provide model of your remote
device to be programmed(VCR,TV)
Make name(toshiba,sony)

Thanx

If your device does not respond to the
remote control after trying all codes
listed for your brand, or if your brand is
not listed at all, try searching for your
code. For example, to search for a code
for your TV:
1. On the remote control, press TV once.
2. Press and hold SETUP until the LED
blinks twice, then release SETUP.
3. Enter 9 - 9 - 1.The LED will
blink twice.
4. Aim the remote control at the the
TV and slowly alternate between
pressing POWER and TV. Stop when
the TV turns off.
NOTE: In the search mode, the remote
control will send IR codes from its library
to the selected device, starting with the
most popular code first.
5. To lock in the code, press and hold
SETUP until the LED blinks twice,
then release SETUP.
6. To search for the codes of your other
devices, repeat steps 1 through 5, but
substitute the appropriate device key
for the device you are searching for

f you have set up the remote control
using the Searching For Your Code
procedure, you may need to find out
which four-digit code is operating your
equipment:
For example, to find out which code is
operating your TV:
1. On the remote control, press TV once.
2. Press and hold SETUP until the LED
blinks twice, then release SETUP.
3. Enter 9 - 9 - 0.The LED will
blink twice.
4. To view the code for the first digit,
press 1 once.Wait 3 seconds, count
the LED blinks (e.g., 3 blinks = 3)
and write down the number.
NOTE: If a code digit is “0”, the LED will
not blink.
5. Repeat step 4 three more times for
remaining digits.Use 2 for the
second digit, 3 for the third digit,
and 4 for the fourth digit.
6. To check for codes of other devices,
repeat steps 1 through 5, but substitute
the appropriate device key for
each device you are checking.
As before,write down each fourdigit
code.
http://www.rockabilly.net/files/manuals/URC-3605.pdf is my source for the info
http://www.rockabilly.net/files/manuals/URC-3605-codes.pdf these are the codes, I didn't see insinia in the TV section, so you may have to use the search feature