After asembling the system does not start
CPU fan and case fan start and keep turning but system does not startup
already replaced memory, cpu an psu with no effect
koen
You'll have to enter the BIOS, with whatever key or key combination and change to boot from cd. Usually ( Delete ) Key..Put your install disk in and reinstall the system. The (MBR) Master Boot Record and system drivers are for your old motherboard and hardware. It requires a fresh install to load the proper motherboard drivers and what not. Use a different hard drive if you need to recover old saved files from your old drive. Hope this helps....
Please rate this solution if it helps.. Thank You....
58 views
Usually answered in minutes!
Once built with new components the system emits a constant beeping when powered on and will not start the post.
×