Emerson ewv404 catv to antenna

Several places have replacement remotes for the EMV404, including http://www.amazon.com/EMERSON-Replacement-Remote-Control-NA372UD/dp/B009H5QVNO and http://www.remotes.com/SearchResults.asp?Search=EMV404 . Many universal remotes may also work. Try codes for Emerson, if available or Funai. The Emerson VCR was made by Funai . Unfortunately, the manual is not available here: http://www.funai-corp.com/support/manuals.aspx . However, they do have a manual for the EWV404 which uses the same remote codes. The two products may be similar enough for the manual to help you. The direct link to the manual is http://www.funai-corp.com/support/om/EWV404.pdf .

I hope this helps.

Cindy Wells

Hi, You need to clean the video head on the inside. or get a special cassette to clean it. Good luck.

According to the Emerson VCR manual, during PLAY mode adjust tracking by pressing the CHANNEL buttons. It could be bad tapes also.

[1]Check around the house. [2]Go to your nearest by Radio shake for a new universal remote control [3] set up the fetures and channel guide included.

Click HERE to download required Operating Manual free copy.

the tv doesn't need to know that the signal is coming from a dish, so the use of catv while using direct tv should be okay. it seems that the problem may be with where you are making the connection from the direct tv box. plug it in where you would a cable box cable.

try 588

Emerson....................................1004, 1006, 1012, 1026, 1029, 1030, 1033, 1035, 1038,
Emerson................................1046, 1047, 1048, 1049, 1073, 1123, 1162, 1171, 1177, 1179, 1191

In the Setup menu there is an option to specify if you use an antenna or cable. Just switch it to antenna.

go to the menu and select auto find or auto program channels.
good luck
please mark the post with a fixya!