Size of screws for my 50 inch vizio tv for mounting bracket

Cautionary video

https://www.google.com/search?q=digihome+50+inch+tv+wall+mount

..

Are u trying to mount it on the wall ?
If so. Buy a universal **** it come with all the screw
Or call Qcwireless thay can get thm for u

If you need further help, I’m available over the phone at https://www.6ya.com/expert/omar_c87dacfef1e87642

sounds like the wrong bracket for that TV.

Yes it will hold,the wall mount u bought it design for weight of 160 LBS and 50"-60" screen sized right?Just make sure hook up the wall mount on and over a wall area with strong woods beams supports have many fours by fours woods beams lumbers to take off the stress of the holding of the tv by those screws alone of the screen frame screws supports only.

Please look on the back, there should be 4 mounting holes (for Metric screws) Iin what is called VESA mounting pattern. Just measure the pattern.
http://en.wikipedia.org/wiki/Flat_Display_Mounting_Interface

When you buy the mounting bracket, it will come with a bag of Metric mounting screws to attach your TV to the bracket.

If you are talking about the mounting screws that go into the back of the television to mount a VESA sized wall bracket, then it's most likely 5mm screws. The length of the screws could differ, depending on the bracket you are attaching, but usually 12mm or 16mm can be used. just make sure that the screws are long enough to thread into the TV completely, but not too long, or they may damage internal components.

If you are talking about the Lag screws needed to mount the bracket to the wall, then use 3/8" width lag screws 2 1/2" to 3 1/2" long, depending on how deep you have to go before hitting the wood stud.

Metric M5 or M6, when you buy wall mounting bracket, it will came with a bag of screws for attaching the TV to the bracket. All my wall mounting brackets for my TV come with screw.

http://s807.photobucket.com/home/budm/allalbums

Metric M5 or M6, they should come with the mounting kit.

Most of these tv's use the 1/4-20 machine screw, for example, has 20 threads per inch and a 1/4 inch diameter. I would recommend that you stick a piece of wire into the screw hole to determine the length that you need and start with this size screw. If it fits nicele and snugs down you will know you have the correct size.