Configure gigaset SE587 for BSNL broadband

Some people find configuring Nokia Siemens Residential Router 1600 with BSNL is a little difficult. So I would like to present a tutorial to setup Internet connection with BSNL using Nokia Siemens Residential Router 1600. Just like other BSNL modem/ router models, we do not need any setup disc to configure Nokia Siemens Residential Router 1600. All we need is to follow some simple steps and adding some values. We can also setup wireless and wireless security from the web based setup page Configure Nokia Siemens Residential Router 1600 In order to configure Nokia Siemens Residential Router 1600 with BSNL follow the steps below.

1. Connect Nokia Siemens Residential Router 1600 to computer using Ethernet cable

2. Power on Nokia Siemens Residential Router 1600

3. Type 192.168.1.1 on address bar of Internet Explorer and press enter

USER Name: admin
Password : admin

Now you can access the web based setup page of Nokia Siemens Residential Router 1600.

Connect the ISP modem to main uplink port. Then connect pc to any other port. Done!

Search siemens gigaset 504

They have very easy setup instructions
http://etisalatsupport.blogspot.com/2012/07/siemens-gigaset-504-router.html


Save file for next time.
http://www.etisalat.ae/eportal/en/images/docs/userguides/modem&drivers/Setup-ADSL-Siemens504AGU.pdf

The source of my caller ID not displaying was a faulty ADSL filter.
For some reason my ADSL filter blocked the caller id information - but worked fine otherwise.
When I changed the filter the caller ID worked fine again.

Hi Friend, In this case I would recommend you to please check if the BSNL modem is the wireless modem or the Wired modem. If it is a wireless modem then you can connect your system wirelessly to internet , provided that the laptop has the wireless card in it.
If it is a wired modem then you can connect your system with the LAN cable to that modem in each slots to get connected to the Internet.

1. Connect your modem with bsnl line.
2. Connect modem to your computer/laptop using LAN wire
3. Power ON your modem
4. Open Internet explorer
5. Type 192.168.254.254 in address bar and click on enter button
6. enter user name as admin and password also as admin. If it not accepts, then reset your router by pressing reset button available in the bottom in hole. Press for 30 seconds
7. after log-in click on ISP Connections.
8. Click on advanced settings
9. Click on Configure the ATM Virtual Circuit
10. Delete the existing entries
11. Click on Add a new VC
12. Enter VPI=0 to VCI=35
13. Select protocol as PPPoE
14. Select the PPPoE Configuration as 'with PPPoE Bridge'
15. Click next button utill page comes for user name password, enter your login details
16. Click on Finish button
17. Reboot router.
That's it, You are done

you will be required to install Siemens Gigaset SE587. drivers on your pc

HI

A flashing ADSL light on the router means its not getting constant broadband signals. Make sure it is connected to the adsl filter without any extensions and the filter should be directly connect to the main phone socket and not to an extension socket. Also check if the phone socket has 1 or more than 1 ports on it. If it has two port its most likely a SSFP socket which does not require a filter as it is inbuit.If all the connections are fine try changing da filter.

Hi - You can get an online guide on the link below:

Gigaset se587

Please update the question & let us know if the information given was useful to you - Good Luck!

Here ya go:

http://uk-tiscali.custhelp.com/cgi-bin/uk_tiscali.cfg/php/enduser/std_adp.php?p_faqid=868

You can try this link, this has a step by step instruction and screen shots as well. I hope this one helps.

http://portforward.com/english/routers/wireless/Siemens/Gigaset-SE587/wireless.htm