I need the default ip address for the Konica Minolta C350

Go to Konica Minolta web site US I assume down load driver for your machine. GO to Admin Settings PW 00000000 or 12345678 default. Network settings common setting to get IP address info

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

IP adress is generated the copier machine.

This is a very common issue in connecting printer in a LAN.

First of all you need to set up a fixed IP address in your Printer. Please follow this as per your user manual. Secondly you need to check whether this fixed IP address is reserved or not. If it is not reserved, please reserve this Fixed IP address assigned to your printer with the unique printer MAC address. You need to follow the usual manual as per your router in how to reserve fixed IP address for a particular device. Thirdly you need to allow your firewall settings in your PC to get through communication with this printer, else your PC will be blocked to communicate with this printer.

Finally just install the printer driver program in your PC and it should work now.

Utility / Administrator settings (pass:12345678) / Network settings / TCP/IP settings. Select auto IP, or enter it manually. You can check IP address by printing Configuration Page: Utility / User Settings / Printer setting / Print Report / Configuration Page. Press start.
Good luck!

bizhub c350 is not installed properly, the driver you are using are the correct drivers.

I guess you mean the c350 is not printing while Windows said the job has been sent? If so, it may have changed IP Address from the time you first install the Printer on Windows. Check the Ports setting of the c350 printer! e.g.
Network Pritners should have Static IP address or at least a reserved DHCP IP Address. Logon to your Router, check the MAC Address of the c350 and reserve/assign it a IP Address near the end of the DHCP range. Save the Router configuration and power cycle the c350. Confirm IP Address changed to the reserved IP. 

Then you have to change all the PC's Printer Configuration of the c350's Port to update the reserved/assigned IP. Or remove the c350 from Printers and Faxes, then run the printer setup software again.

Easiest way is to change to SMB scanning which will give you direct scanning to PC or server. Create a new address in the machines address tab in the browser add the (must be a fixed) ip address of the machine it is going to with the folder name, user name and password and it will work a treat.

GUIDE IS AVAILABLE ON WWW.MYKONICAMINOLTA.COM

To print out machine current ip address, go to utilities, user setting, printer setting, print reports, configuration.

Is there network card is installed in it, if yes then you can configure it with your network go to machine Manu in machine control panel and the in network settings here you can give the IP address and subnet mask after then reboot the machine.
If network card is no installed behind the machine then you can use its built-in USB or and parallel printer without NIC card.