At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
watching a dvd last week, and it switched to the "red" shadow.. I know it has something to do with convergence. But what can one do? Does anyone have the schematic for this? Mine was mfg August 2002.
watching a dvd last week, and it switched to the "red" shadow.. I know it has something to do with convergence. But what can one do? Does anyone have the schematic for this? Mine was mfg August 2002.
I have a 3D look on every channel and 2 items are seen with each on the screen. Though using flash focus should work out the problem, I still see 3 crosshairs at end of process what should I do?I have a 3D look on every channel and 2 items are seen with each on the screen. Though using flash focus should work out the problem, I still see 3 crosshairs at end of process what should I do?
have you unplugged the set for a little bit then start the antenna channel setup , then start the auto focus convergence untill the cross turns white? , then exit the auto focus/ , in that order? have you unplugged the set for a little bit then start the antenna channel setup , then start the auto focus convergence untill the cross turns white? , then exit the auto focus/ , in that order?
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
There is problem with your tv C board Base.First check it there is fungus if yes then replaced it with good one if still problem then focus block or fbtfautly.
Flash focus button push,didn't solved pictures convergence problems.The tv convergence board is dead.The 2 STK convergence ICS and some or all it resistors are dead.These parts on the tv convergence board,must be replaced to solved the tv picture convergence problems.The shop,will cost u $300-350 for parts and labors.
Remove unshielded speakers or other metallic objects near the TV. It can cause picture distortion.
Tune the TV to channel or cable program.
Run the TV for at least 30 minutes.
Press FLASH FOCUS on the front panel of the TV.
A cross pattern appears and FLASH FOCUS begins to work. The adjustment is completed when the cross pattern becomes white and you are returned to the program you were watching.
You cannot perform any other functions until FLASH FOCUS has completed its cycle. If you perform any other operation while FLASH FOCUS is in progress, FLASH FOCUS operation is canceled.
If after the Flash Focus™ feature has been performed, the colors on the FLASH FOCUS screen do no line up (converge), press the
FLASH FOCUS button on the television to begin the
cycle again. If the colors on the FLASH FOCUS screen
continues to appear misaligned, service will be required .
NOTE: It is recommended to
perform the Flash Focus™ feature about thirty minutes after the television has
been turned on and keep the room as dark as possible.
watching a dvd last week, and it switched to the "red" shadow..
I know it has something to do with convergence. But what can one do?
Does anyone have the schematic for this? Mine was mfg August 2002.
I have a 3D look on every channel and 2 items are seen with each on the screen. Though using flash focus should work out the problem, I still see 3 crosshairs at end of process what should I do?
have you unplugged the set for a little bit then start the antenna channel setup , then start the auto focus convergence untill the cross turns white? , then exit the auto focus/ , in that order?
×