I have uniden phone(procut no. DECT1480) there are some voice message. and hendset is blinking. but I dont know how can i get this message. and I like to delete. also i can't get a dial tone righ

See the instructions beginning on page 15 of this manual: http://www.uniden.com/content/ebiz/uniden/resources/ownersmanuals/DECT1480-2om.pdf

I had this same problem with my dect 1480, searched for answers and couldn't find any that worked. I explored settings on the phone and found a solution. I went into Menu - global setup - VMWI reset. (Voice Mail Waiting Indicator) Fixed the problem immediately.

Do you mean the status light on the handset or the one on the base? The status light on the base will be on if the answering system is on. The handset status light will be on but steady when the handset is on the charger. (It's a battery charging indicator in that case; take the handset off the charger to stop the charging system. It provides a trickle charge to offset the battery discharging over time) The light blinks to indicate new messages are available on the answering system. Press the Play button on the base or the Messages/Mute button on the handset to play new messages.

Uniden offers the manuals for many of their phones on their support site: http://www.uniden.com/bin/venda?ex=co_disp-view&bsref=uniden&scat=dectphones_mnl . The direct link to the manual for the DECT-1480 is http://www.uniden.com/content/ebiz/uniden/resources/ownersmanuals/DECT1480-2om.pdf .

I hope this helps.

Cindy Wells

Follow the instructions on page 17 of the downloadable manual at
http://www.uniden.com/content/ebiz/uniden/resources/ownersmanuals/DECT1480-2om.pdf

For most of the Uniden DECT phones, you set up the outgoing message from the handset. Make sure the answering system is on. For the DECT1480, press Messages/Mute on the handset when the handset is in standby to enter the answering system menu. Then press 5 (or wait until the current message ends). Then press 8 (record new message). Wait for the prompt and then speak your message. When finished, press 8 again. Then listen to the play-back of your message. Press End to save and exit the menu. Alternatively you can scroll through the list of commands and press Menu/Select to enter the sub menu or command.

There are several models of Uniden DECT 6.0 phones. If you have a different phone, you should check your manual. The entire list of Uniden phone manuals is available here: http://www.uniden.com/scat/cordlessphones_mnl . Scroll down to your product and click on the version in your language.

I hope this helps.

Cindy Wells
(most of the Uniden phones that I know have the same set of directions for the answering system outgoing message.)

http://www.uniden.com/content/ebiz/uniden/resources/ownersmanuals/DECT1480-5Com.pdf

The manual is the same for all DECT1480 phones; the digit after the dash indicates the number of handsets that came with the phone initially.

The English version of the manual for the DECT 1480 is here http://www.uniden.com/pdf/DECT1480-3om.pdf . This is a 2 accessory handset version. A complete list of the available Uniden DECT cordless phone manuals is here: http://www.uniden.com/index/manuals_results.cfm?cat=59 .

I hope this helps.

Cindy Wells

Select the model of your phone from the list at
http://uniden.com/pdf/DECT1480-3om.pdf

I have a Uniden 5.8 GHz and the message indicator light will not stop flashing. The phone screen says I have a voice mail but I don't. Does anyone know to fix it?

OK. You have a phone set with an answering machine, yet you continue to pay MaBell for Voice-Mail. Is there any compelling reason. That was my feeling when I first read your question but I thought you might not like what I had to say, so I consulted the Uniden FAQ and here what they have to say.

If you Uniden phone has a digital answering machine, and you also have voice mail through your phone company, the message indicator light will not light up when you have a message in your voice mail system. We recommend you discontinue your voice mail and use the Uniden internal digital answering system.