My suround sound want work only left tv inturnal speeker works

Hi,
Check the menu. In almost flat panel tvs there is setting that allow you to select in between internal speaker and external speaker. If the selected setting is external speaker the you wont get sound from the internal speakers.
www.electro-medical.blogspot.com

Hi Charles,

To hear audio from your surround sound (stereo receiver) the audio signal needs to be managed by the receiver. You likely have your DVD machine connected (going into) your receiver, then your receiver going into your TV --- your receiver is splitting the audio to the speaker, then the video to your tv. To get your TV signal split, you need to have your cable signal going into your receiver as opposed to into your TV directly.

Definitely there would be setting, find it out from user manual or contact the customer care

your suround sound system has been wired up so only cable plays throgh speakers

does your tv have a audio out RCA jack?
if so then connect the home theater to that

i cant help anymore because i dont know the suround sound model number ot what tv

do you wan the suround sound to play sound for what the tv is displaying or just the ps3

for just ps3

connect hdmi to ps3 and tv
connect optical to ps3 and suround sound
change video settings to hdmi
change sound settings to optical
it asks to set settings automatically you have tyo doo it manually

if you want to play every thing that tv displays then
connect ps3 to tv with hdmi
connect suround sound with hdmi to tv
(this might not work)
if it dont work then

connect ps3 to tv with hdmi
and your tv should have sound out or something along those lines it should be two phono plugs in the back of the tv connect that to the suround sound

It sounds like there is a blown left channel. Its probably time for a new stereo. But make sure the balance isn't turned all the way to the right first.

got it to work off the cable box.

You will need a DVD player with an optical output, as the sky engineer said. A Co-axial S/PDIF output could also work if your surround sound has that input, however not all units transmit surround encoded sound through the Co-Axial output. Only option really is to upgrade if that doesn't work

most like the amp on speakers wwent bad best u can do add seprate samsng sterio suround system or ect form dish cable box to sterio direct for tv sound or rca outs on tv if those sstill work

It's very simple. The center speaker should be directly in front of you, usually where the TV is located and the front left and right should be at the side of the TV (left and right), the two rear speakers should be anywhere behind you and the subwoofer can be placed anywhere in the room. The front speakers and center should be within 6' to 10 feet from the seating position and the rears can be anywhere behind the seated position.
Hope that helps.