Setting clock I have a chaney Acu-rite clock (alarm) model 13002 I would like to set the correct time, it always shows about 5 mins fast, and have lost my instructions, ? help

Hello
Get into this link. You can get all the details for your clock radio from there.
lib.store.yahoo.net/lib/partshelf/Acu-Rite-00592W-Manual.

Before attempting to set the time, let the outdoor transmitter sync with the indoor receiver. Once that's done, you'll be able to successfully set and retain the date and time.

press

take a look at Chaney Instruments http://diplodocs.nl/references.php

Wireless Thermometer with Sensor
Model 00735 ??

Press Set-up, third round button from right and hold it down until "hour" on the time display flashes. Then press "set-up" again, and again (for me it was 8 times), until you get to where the "C" is flashing you want to change to "F." Now, press "Min" on the far left once to change it to "F." Press "set-up" two more times to get out of the cycle, and you're done.

I had the exact same problem, and found the answer on the Chaney Instrument FAQ page. There's no real solution, but here is the explanation:
Q: My wireless weather station periodically beeps, why?
A: Make sure that any alert and/or alarm features are deactivated first. Constant, sporadic beeping is generally due to the unit’s ability to detect a foreign radio frequency of another wireless unit when that unit transmits a signal. Wireless devices that may cause beeping but are not limited to these devices are; scanners; computers w/wireless keyboard/mouse; or other wireless weather instruments. Essentially, any wireless devices transmitting on a radio frequency have the potential to interfere with each other. Limit the amount of wireless devices to lesson the chance of interference. When beeping occurs, one device will need to be deactivated.

How to Change the Time Zone
Press and hold the “-“ button for 3 seconds the letter P will appear where the seconds are than press and release the “-“ button until the correct letter for your time zone appears. The four time zones are P is Pacific, M is Mountain, C is Central and E is Eastern Time zone. Press the SET button to confirm or leave the setting to confirm and exit automatically.

You have to set the Year. Hold the time Set until the hours blink then push the time set button again and the minutes blink then push the time set button again and the year will blink. Change it to 09. Then push the time set button again and set the date.

How do reset time on model 13003 ?? It reads 12:15 and the Time is 11:27 Clark page [email protected]

Acu-Rite is a brand of the Chaney Instruments Co. Here's a link to the company website. They don't have a lot of information, but you can at least get a product manual here. I'm guessing they just import and distribute the products and don't do any manufacturing.

http://www.atomixtime.com/