How to reset the lamp timer on a sonya ksd-60a2000

please re setup it !
or hit fingers on the speakers if not worked
then go to the sony searvice centre
and check it there is a loose connections !

With the set turned off:

RESETTING THE LAMP TIME
When replacing the lamp, use the following to reset the lamp time.
1. If the Self-Diagnostic screen is already displayed, proceed to step 4.
If not, Power off (Set to Standby mode).
2. Press DISPLAY Channel 5 Sound Volume -
POWER
3. To access the Lamp reset, press 5 until the TIME category displays.
4. Press 1 until the RSET item displays.

Hi,

The most common cause of picture disappearing and returning in a Sony LCD Rear Projection TV is a faulty bulb. Replacing the bulb is the first step in troubleshooting this type of problem in KDS-60A2000 and all other Sony Rear Projection LCD TVs.

Sony Lamp Gallery shows all Models and Lamps for Sony Rear Projection LCD TVs. KDS-60A2000 uses XL-5200U Lamp.

easyab

Hi,
3 times red light blinking indicates that Lamp Cover has not been fixed in its location properly after lamp replacement.
Please make sure lamp cover (its first thing that was removed to replace lamp) is installed securely.
Thanks.

Attach the power cord to the projector and plug it into an electrical outlet. Turn the projector on and allow it to initialize.
Press the "Menu" button on the top of the projector. Use the left and right arrow buttons to move the red box pointer to the "Settings" icon.
Use the up and down arrow buttons to move the red box pointer to the "Lamp Counter" icon. Press the "Select" button.
A pop-up window will appear displaying the number of hours accumulated on the lamp. Below where the hours are displayed is the option to reset the counter. Select the "Reset" option and then select "Yes" to confirm. This will reset the lamp hours counter to zero and reset the indicator light.

According to the manual (pg 53) : "If the lamp is not securely reattached, the self-diagnostic function may be triggered and the POWER LED blinks three times."

Use the "Lamp Replacement" option in the Setup menu to reset the timer.

change the lamp is is too weak to operate properly.

Bad lamp>replace lamp and reset timer in customer menu .Common problem with SOny.

Replace lamp and reset timer in customer menu.Common problem with SOny.