Question about Panasonic Navigon 5100

1 Answer

Navigon 5100 gps

Hello sir
my navigon 5100 gps works good but when i put on car charger ,gps stop working and on screen an icon comes of charging mode so what should i do to work my gps continue while charging

Posted by on

  • Anonymous Nov 28, 2008

    I'm having a problem getting it to turn on or off. Hold for 6 seconds but takes several tries. Any ideas?

  • Anonymous Dec 05, 2008

    when i plug the charger in the gps stop working what can i do

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Contributor
  • 728 Answers

Try turning it off and turning it back on while it is still plugged in and see if that works.

Posted on Oct 23, 2008

Ad

1 Suggested Answer

Anonymous

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I give my brand new Navigon 3300 a good overnight charge


if you have a pc, you can use the usb to mini jack and it will charge

Mar 09, 2010 | Navigon 3300 Max Car GPS Receiver

2 Answers

Can my NVG5100 be used for navigation when charging


it should be able to. i have a garmin and it will work while plugged in.

Dec 03, 2009 | Panasonic Navigon 5100

1 Answer

My navigon 5100 gps wont charge while in use


Switch it on and let it totally discharge - the battery could have established a memory and thinks that it is fully charged -the wonderful world of electronics where nothing is what it seems.
Once discharged put it to OFF position and recahrge it.
Good Luck

Sep 13, 2009 | Panasonic Navigon 5100

1 Answer

Navigon 2100 displays the computer symbol when connected to charg


Wiring diagram pinout for Navigon GPS charge and concurrent use Pin Pin
Name Description 1 +5V 5 Volts Direct Current 2 Data floating/Not connected 3 Data floating/Not connected X Ident Conneted to Pin 4 (GND) as pure short, no resistor 4 Ground Ground, shorted to pin "X" Use of standard mini-b will place unit in Data Exchange/Synchronization mode. Use of mini-b with a 4-x pure short will allow use of Navigation software and concurrent charging. USB power source must be 1000 ma or above.

Sep 13, 2009 | Navigon 2100 Portable GPS Receiver

1 Answer

Navigon 5100 When connected to charger, computer icon comes up


you are not using a charger with the right voltage- you need 5 volts 1.2 amps radio shack has a gps charger that will work

Jul 15, 2009 | Panasonic Navigon 5100

1 Answer

Navigon 5100 does not connect with GPS


NAVIGATION IS NOT WORKING. THE SCREEN IS " NAVIGON AND THE WORLD IS YOURS"

WHAT IS THE SOLUTION.

Jan 10, 2009 | Navigon 5100 GPS Navigator Handheld GPS...

9 Answers

Plug in car charger and it shows navigon connected to computer


The problem lies with the fact that a standard mini usb pin-out has + voltage on pin 1 and ground on pin 5. The navigon is programmed to recognize this as a computer. The navigon charger however has + voltage on pin 4 and ground on pin 5. The reason for navigon doing this as opposed to following the standard pin-out is due to the unit requiring a stronger power supply to charge the battery. USB current output on a computer does not have the capacity to do this. As a consequence, you will have to find a charger that has the right pin-out for this device ( + on pin 4 and - on pin 5 ). The tough thing is, there is no way to tell one from the other, they look identical. However, I have found that chargers with a capacity of 1000 ma or greater are pinned-out like above ( + on pin 4 and - on pin 5 ). Other than using a multimeter to verify the pins, the only thing to do, would be to plug it in and see if it works. Hope this helps.

Dec 28, 2008 | Navigon 2100 Portable GPS Receiver

2 Answers

Navigon 5100 won't turn on when battery is charged.


try holding the power button down for 15 to 20 seconds - that worked for mine!
Hope that helps

Nov 29, 2008 | Panasonic Navigon 5100

Not finding what you are looking for?
Panasonic Navigon 5100 Logo

Related Topics:

332 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic GPS Experts

Richard Foster
Richard Foster

Level 2 Expert

88 Answers

Marvin
Marvin

Level 3 Expert

85223 Answers

John Gerrard

Level 2 Expert

308 Answers

Are you a Panasonic GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...